# Raspberry Pi image specs

This repository contains the files with which the images referenced at
https://wiki.debian.org/RaspberryPiImages have been built.

## Option 1: Downloading an image

See https://wiki.debian.org/RaspberryPiImages for where to obtain the
latest pre-built image.

## Option 2: Building your own image

If you prefer, you can build a Debian buster Raspberry Pi image
yourself. If you are reading this document online, you should first
clone this repository:

```shell
git clone --recursive https://salsa.debian.org/raspi-team/image-specs.git
cd image-specs
```

For this you will first need to install the `vmdb2` package, on a
Debian Buster or higher system.

This repository includes a master YAML recipe (which is basically a
configuration file) for all of the generated images, diverting as
little as possible in a parametrized way. The master recipe is
[raspi_master.yaml](raspi_master.yaml).

A Makefile is supplied to drive the build of the recipes into images —
`raspi_0w` (for the Raspberry Pi 0, 0w and 1, models A and B),
`raspi_2` (for the Raspberry Pi 2, models A and B) and `raspi_3`
(models A, B, B+). That is, if you want to build the default image for
a Raspberry Pi 3B+, you can just issue:

```shell
   make raspi_3.img
```

You might also want to edit them to customize the built image. If you
want to start from the platform-specific recipe, you can issue:

```shell
   make raspi_3.yaml
```
The recipe drives [vmdb2](https://vmdb2.liw.fi/), the successor to
`vmdebootstrap`. Please refer to [its
documentation](https://vmdb2.liw.fi/documentation/) for further
details; it is quite an easy format to understand.

Copy the generated file to a name descriptive enough for you (say,
`my_raspi.yaml`). Once you have edited the recipe for your specific
needs, you can generate the image by issuing the following (as root):

```shell
    vmdb2 --rootfs-tarball=my_raspi.tar.gz --output \
	my_raspi.img my_raspi.yaml --log my_raspi.log
```

This is, just follow what is done by the `_build_img` target of the Makefile.

## Installing the image onto the Raspberry Pi

Plug an SD card which you would like to entirely overwrite into your SD card reader.

Assuming your SD card reader provides the device `/dev/mmcblk0`
(**Beware** If you choose the wrong device, you might overwrite
important parts of your system.  Double check it's the correct
device!), copy the image onto the SD card:

```shell
sudo dd if=raspi3.img of=/dev/mmcblk0 bs=64k oflag=dsync status=progress
```

Then, plug the SD card into the Raspberry Pi, and power it up.

The image uses the hostname `rpi0w`, `rpi2` or `rpi3` depending on the
target build. The provided image will allow you to log in with the
`root` account with no password set, but only logging in at the
physical console (be it serial or by USB keyboard and HDMI monitor).