426 lines
11 KiB
Plaintext
426 lines
11 KiB
Plaintext
|
;
|
||
|
|
;
|
||
|
|
; CONFIGURATION FILE FOR G8BPQ SWITCH SOFTWARE
|
||
|
|
;
|
||
|
|
; The order of parameters in not important, but they
|
||
|
|
; all must be specified - there are no defaults
|
||
|
|
;
|
||
|
|
PASSWORD=ABCDEFGHILKLMNOPQRSTUVWXY ; SYSOP Passord
|
||
|
|
|
||
|
|
LOCATOR=IO68VL ; Enable Map Reporting
|
||
|
|
MAPCOMMENT=BPQ32 Test Node<BR>Skigersta, Isle of Lewis
|
||
|
|
|
||
|
|
;
|
||
|
|
;
|
||
|
|
; BBS enables the Application support system. If you have specified any of the APPLnCALLS,
|
||
|
|
; you should set BBS to 1.
|
||
|
|
;
|
||
|
|
BBS=1 ; INCLUDE BBS SUPPORT
|
||
|
|
;
|
||
|
|
; NODE
|
||
|
|
NODE=1 ; INCLUDE SWITCH SUPPORT
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
; The NODES and ROUTES tables can be saved, so that they can be reloaded when the software is restarted,
|
||
|
|
; rather than having to wait for the tables to be rebuilt. There is a program SAVENODES.exe and a command
|
||
|
|
; to the BPQ32 console to to this. By Setting AUTOSAVE=1, the tables will be saved each time the softare closes
|
||
|
|
|
||
|
|
AUTOSAVE=1 ; Save Nodes File before exiting
|
||
|
|
|
||
|
|
;
|
||
|
|
; Station Identification.
|
||
|
|
;
|
||
|
|
; If a user connects to the NODE Callsign or Alias, he is linked
|
||
|
|
; to the switch code, and can use normal NetRom/TheNet commands
|
||
|
|
;
|
||
|
|
; If he connects to an Application Callsign or Alias he will be connected
|
||
|
|
; directly to the corresponding application. If not available, the connect will
|
||
|
|
; be rejected. See the section on Application Calls towards the bottom of the file for
|
||
|
|
; more information.
|
||
|
|
;
|
||
|
|
; Note that for compatibility with the DOS version, and older versions of BPQ32, BBSCALL is an alias for APPL1CALL,
|
||
|
|
; and BBSALIAS is an alias for APPL1ALIAS. If both BBSCALL and APPL1CALL are specified, the BBSCALL will be ignored.
|
||
|
|
;
|
||
|
|
|
||
|
|
NODECALL=G8BPQ-2 ; NODE CALLSIGN
|
||
|
|
NODEALIAS=BPQ
|
||
|
|
|
||
|
|
; 'ID' MESSAGE - SENT EVERY IDINTERVAL MINS
|
||
|
|
;
|
||
|
|
; WILL BE ADDRESSED FROM THE PORT CALLSIGN (IF DEFINED)
|
||
|
|
; ELSE FROM THE NODE CALL
|
||
|
|
;
|
||
|
|
; The main purpose of this is to satisfy the requrements of those administations that require a regular station
|
||
|
|
; identification in the same mode as used for communication.
|
||
|
|
|
||
|
|
IDMSG:
|
||
|
|
Network node (BPQ)
|
||
|
|
***
|
||
|
|
;
|
||
|
|
|
||
|
|
; 'I' COMMAND TEXT
|
||
|
|
;
|
||
|
|
;
|
||
|
|
INFOMSG:
|
||
|
|
G8BPQ Win32 Test Switch, Skigersta, Isle of Lewis.
|
||
|
|
***
|
||
|
|
|
||
|
|
; BTEXT is the default beacon sent by the Node. Note that application programs may change this, or
|
||
|
|
; generate their own beacons.
|
||
|
|
|
||
|
|
; An APRS compatible position may be included.
|
||
|
|
|
||
|
|
BTEXT:
|
||
|
|
=5828.54N/00612.69W- {BPQ32}
|
||
|
|
G8BPQ's Test Node
|
||
|
|
***
|
||
|
|
|
||
|
|
IDINTERVAL=15 ; 'ID' BROADCAST INTERVAL (UK Regs require an AX25 ID every 15 mins)
|
||
|
|
BTINTERVAL=15 ; BTEXT is sent at this interval
|
||
|
|
|
||
|
|
;
|
||
|
|
; CTEXT - Normally will only be sent when someone connects to
|
||
|
|
; the NODE ALIAS at level 2. If FULL_CTEXT is set to 1, it
|
||
|
|
; will be sent to all connectees. Note that this could confuse BBS
|
||
|
|
; forwarding connect scripts.
|
||
|
|
;
|
||
|
|
CTEXT:
|
||
|
|
Welcome to G8BPQ's Test Switch in Skigersta
|
||
|
|
Type ? for list of available commands.
|
||
|
|
***
|
||
|
|
|
||
|
|
FULL_CTEXT=0 ; SEND CTEXT TO EVERYBODY
|
||
|
|
|
||
|
|
HFCTEXT=BPQ32 Node, Skigersta
|
||
|
|
|
||
|
|
; Network System Parameters.
|
||
|
|
;
|
||
|
|
; These are my values. Many other node sysops use other values. If in doubt, liase with
|
||
|
|
; those running nodes that you link to
|
||
|
|
|
||
|
|
OBSINIT=5 ; INITIAL OBSOLESCENCE VALUE
|
||
|
|
OBSMIN=4 ; MINIMUM TO BROADCAST
|
||
|
|
NODESINTERVAL=60 ; 'NODES' INTERVAL IN MINS
|
||
|
|
|
||
|
|
L3TIMETOLIVE=25 ; MAX L3 HOPS
|
||
|
|
L4RETRIES=4; ; LEVEL 4 RETRY COUNT
|
||
|
|
;
|
||
|
|
L4TIMEOUT=60; ; LEVEL 4 TIMEOUT
|
||
|
|
L4DELAY=10 ; LEVEL 4 DELAYED ACK TIMER
|
||
|
|
L4WINDOW=4 ; DEFAULT LEVEL 4 WINDOW
|
||
|
|
;
|
||
|
|
MINQUAL=140 ; MINIMUM QUALITY TO ADD TO NODES TABLE
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
; The following MAX params set the limits for various tables.
|
||
|
|
;
|
||
|
|
; Although significantly larger values can be used, a common area is used
|
||
|
|
; for these tables and the buffer pool, so don't increase them more than
|
||
|
|
; necessary.
|
||
|
|
|
||
|
|
MAXLINKS=100 ; MAX LEVEL 2 LINKS (UP,DOWN AND INTERNODE)
|
||
|
|
MAXNODES=300; ; MAX NODES IN SYSTEM
|
||
|
|
MAXROUTES=30 ; MAX ADJACENT NODES
|
||
|
|
MAXCIRCUITS=150 ; NUMBER OF L4 CIRCUITS
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
BUFFERS=999 ; PACKET BUFFERS - 999 MEANS ALLOCATE AS MANY
|
||
|
|
; AS POSSIBLE - NORMALLY ABOUT 600, DEPENDING
|
||
|
|
; ON OTHER TABLE SIZES
|
||
|
|
;
|
||
|
|
; TNC DEFAULT PARAMS
|
||
|
|
;
|
||
|
|
PACLEN=236 ; MAX PACKET SIZE
|
||
|
|
;
|
||
|
|
; PACLEN is a problem! The ideal size depends on the link(s) over
|
||
|
|
; which a packet will be sent. For a session involving another node,
|
||
|
|
; we have no idea what is at the far end. Ideally each node should have
|
||
|
|
; the capability to combine and then refragment messages to suit each
|
||
|
|
; link segment - maybe when there are more of my nodes about than 'real'
|
||
|
|
; ones, i'll do it. When the node is accessed directly, things are a
|
||
|
|
; bit easier, as we know at least something about the link.
|
||
|
|
; So there are two PACLEN params, one here and
|
||
|
|
; one in the PORTS section. This one is used to set the initial value
|
||
|
|
; for sessions via other nodes, and for sessions initiated from here.
|
||
|
|
; The other is used for incoming direct (Level 2) sessions. In all cases
|
||
|
|
; the Node PACLEN command can be used to override the defaults.
|
||
|
|
;
|
||
|
|
; 236 is the largest that can be sent over a NETROM link without fragmetation.
|
||
|
|
; so don't go above this unless you don't have ant NETROM links.
|
||
|
|
;
|
||
|
|
; Level 2 Parameters
|
||
|
|
;
|
||
|
|
; Most Level 2 parametes are specified in the PORTS section'
|
||
|
|
;
|
||
|
|
T3=180 ; LINK VALIDATION TIMER (3 MINS)
|
||
|
|
IDLETIME=900 ; IDLE LINK SHUTDOWN TIMER (15 MINS)
|
||
|
|
;
|
||
|
|
;
|
||
|
|
HIDENODES=0 ; IF SET TO 1, NODES STARTING WITH # WILL
|
||
|
|
; ONLY BE DISPLAYED BY A NODES * COMMAND
|
||
|
|
;
|
||
|
|
; THE *** LINKED COMMAND IS INTENDED FOR USE BY GATEWAY SOFTWARE, AND
|
||
|
|
; CONCERN HAS BEEN EXPRESSED THAT IT COULD BE MISUSED. I RECOMMEND THAT
|
||
|
|
; IT IS DISABLED IF NOT NEEDED.
|
||
|
|
;
|
||
|
|
ENABLE_LINKED=A ; CONTROLS PROCESSING OF *** LINKED COMMAND
|
||
|
|
; Y ALLOWS UNRESTRICTED USE
|
||
|
|
; A ALLOWS USE BY APPLICATION PROGRAM
|
||
|
|
; N (OR ANY OTHER VALUE) DISABLE
|
||
|
|
;
|
||
|
|
; AX25 PORT DEFINITIONS
|
||
|
|
;
|
||
|
|
; These define the external links - normally to radios, but possibly
|
||
|
|
; to other computers, modems, etc.
|
||
|
|
;
|
||
|
|
|
||
|
|
; The KISS protocol supports dual port TNC's such as the KAM and KPC4.
|
||
|
|
; You should define two port entries with the same IO addr
|
||
|
|
; and SPEED - set CHANNEL=A for the first and B for the second.
|
||
|
|
;
|
||
|
|
; Note that all timer values are in ms intervals. Most TNC's
|
||
|
|
; use different units for the various timers, so be careful!
|
||
|
|
;
|
||
|
|
; All parameters should be set for all ports, but not all
|
||
|
|
; drivers support all features. For instance, the NETROM driver
|
||
|
|
; does not use the TXDELAY, SLOTTIME and PERSIST values. The NETROM
|
||
|
|
; driver only works in FULL DUPLEX mode, and the HDLC only in
|
||
|
|
; HALF DUPLEX.
|
||
|
|
;;
|
||
|
|
; CWID works only on DRSI and PC120 cards, and can be suppressed
|
||
|
|
; by omitting the parameter.
|
||
|
|
;
|
||
|
|
; BECAUSE OF OUR ODD LICENCING CONDITIONS YOU MAY WISH TO BAN
|
||
|
|
; CONNECTIONS TO THE BBS CALLSIGN ON SOME PORTS - USERS MAY STILL
|
||
|
|
; CONNECT USING L4, OR CONNECT TO THE NODE ADDR, AND USE BBS
|
||
|
|
; COMMAND. PUT 'BBSFLAG=NOBBS' TO ACTIVATE THIS FUNCTION.
|
||
|
|
; 'BBSFLAG=BBSOK', OR NO PARM, MEANS BEHAVE AS NORMAL
|
||
|
|
;
|
||
|
|
; You can have an extra callsign and alias for each
|
||
|
|
; port for user access only. The callsigns defined in NODECALL and
|
||
|
|
; BBSCALL are used for all networking activity.
|
||
|
|
;
|
||
|
|
|
||
|
|
PORT
|
||
|
|
ID=LOOPBACK
|
||
|
|
TYPE=INTERNAL
|
||
|
|
PROTOCOL=KISS
|
||
|
|
CHANNEL=A
|
||
|
|
QUALITY=0
|
||
|
|
MAXFRAME=6
|
||
|
|
FULLDUP=0
|
||
|
|
FRACK=10000
|
||
|
|
RESPTIME=3000
|
||
|
|
RETRIES=10
|
||
|
|
PACLEN=200
|
||
|
|
TXDELAY=500
|
||
|
|
SLOTTIME=100
|
||
|
|
PERSIST=64
|
||
|
|
DIGIFLAG=1
|
||
|
|
UNPROTO=FBB
|
||
|
|
ENDPORT
|
||
|
|
|
||
|
|
PORT
|
||
|
|
ID=AXIP Link
|
||
|
|
TYPE=EXTERNAL
|
||
|
|
DLLNAME=BPQAXIP.DLL
|
||
|
|
QUALITY=200
|
||
|
|
MAXFRAME=4
|
||
|
|
FRACK=5000
|
||
|
|
RESPTIME=1000
|
||
|
|
RETRIES=10
|
||
|
|
PACLEN=236
|
||
|
|
MINQUAL=150
|
||
|
|
UNPROTO=FBB ; DEFAULT UNPROTO ADDR
|
||
|
|
BCALL=GM8BPQ ; Call for Beacons
|
||
|
|
|
||
|
|
CONFIG
|
||
|
|
|
||
|
|
UDP 10093 # Optional. Enables UDP support, and defines the port
|
||
|
|
# AX.IP listens on. You can specify more than one
|
||
|
|
# UDP line if you need to listen on more than one port
|
||
|
|
|
||
|
|
MHEARD # Optional - opens a window to display a "Heard List"
|
||
|
|
|
||
|
|
BROADCAST NODES
|
||
|
|
|
||
|
|
MAP G8BPQ-7 G8BPQ.NO-IP.COM UDP 10093 B
|
||
|
|
|
||
|
|
; Steve Conrad, VE9SC, provides a service which displays a map of BPQMailChat
|
||
|
|
; nodes dynamically updated: http://guardian.no-ip.org/bpqmap/ChatNetwork.htm
|
||
|
|
; The following line causes your Chat Node to be included on the map.
|
||
|
|
|
||
|
|
MAP DUMMY chatmap.g8bpq.net UDP 10090
|
||
|
|
|
||
|
|
ENDPORT
|
||
|
|
|
||
|
|
PORT
|
||
|
|
ID=BPQEther Link
|
||
|
|
TYPE=EXTERNAL
|
||
|
|
DLLNAME=BPQETHER.DLL
|
||
|
|
QUALITY=200
|
||
|
|
IOADDR=2
|
||
|
|
CHANNEL=A
|
||
|
|
MAXFRAME=7
|
||
|
|
FRACK=5000
|
||
|
|
RESPTIME=1000
|
||
|
|
RETRIES=10
|
||
|
|
PACLEN=236
|
||
|
|
MINQUAL=255
|
||
|
|
UNPROTO=MAIL ; DEFAULT UNPROTO ADDR
|
||
|
|
|
||
|
|
CONFIG
|
||
|
|
|
||
|
|
TXMODE BPQ # BPQ or RLI
|
||
|
|
RXMODE BPQ # BPQ or RLI
|
||
|
|
TYPE 08FF # Ethernet Type
|
||
|
|
DEST 01-42-50-51-00-00 # Target Ethernet Addr - Multicast as used in DOS BPQCODE
|
||
|
|
SOURCE 02-FF-60-BA-5C-9E # Source Ethernet Addr
|
||
|
|
ADAPTER \Device\NPF_{959094A1-C20D-4FFD-AF68-D43229E4854B} # Adapter Name
|
||
|
|
|
||
|
|
ENDPORT
|
||
|
|
|
||
|
|
;
|
||
|
|
; WINMOR Port
|
||
|
|
;
|
||
|
|
PORT
|
||
|
|
ID=WINMOR Port 1
|
||
|
|
TYPE=EXTERNAL
|
||
|
|
DLLNAME=WINMOR.DLL
|
||
|
|
INTERLOCK=4
|
||
|
|
CONFIG
|
||
|
|
ADDR 127.0.0.1 8506 PTT DTR
|
||
|
|
RIGCONTROL COM61 4800 ICOM IC718 5E 5 3.573/u1nA1 7.077/u1 10.133/u1 10.146/u1wA3 14.1105/u1w
|
||
|
|
CWID True
|
||
|
|
BW 1600
|
||
|
|
DRIVELEVEL 100
|
||
|
|
BUSYLOCK False
|
||
|
|
|
||
|
|
ENDPORT
|
||
|
|
|
||
|
|
PORT
|
||
|
|
ID=KAM PACTOR COM 100
|
||
|
|
TYPE=EXTERNAL
|
||
|
|
PROTOCOL=PACTOR
|
||
|
|
IOADDR=64
|
||
|
|
SPEED=9600
|
||
|
|
DLLNAME=KAMPACTOR.DLL
|
||
|
|
QUALITY=0
|
||
|
|
INTERLOCK=4
|
||
|
|
|
||
|
|
CONFIG ; Driver-Specific Configuration
|
||
|
|
|
||
|
|
APPL RMS ; Autoconnect to BPQ32 RMS Application
|
||
|
|
RIGCONTROL COM2 19200 ICOM IC700 70 4 14.103/U1W 14.112/U1 18.1/U1N 10.12/L1
|
||
|
|
|
||
|
|
|
||
|
|
OLDMODE ; Optional - Causes controller to be set to PACTOR mode instead of TOR mode
|
||
|
|
XMITLVL 50/35;
|
||
|
|
|
||
|
|
ENDPORT
|
||
|
|
|
||
|
|
PORT
|
||
|
|
ID=SCS PACTOR COM 103
|
||
|
|
DRIVER=SCSPACTOR
|
||
|
|
COMPORT=103
|
||
|
|
SPEED=38400
|
||
|
|
PORTCALL=GM8BPQ
|
||
|
|
|
||
|
|
CONFIG ; Driver-Specific Configuration
|
||
|
|
|
||
|
|
APPL RMS ; Autoconnect to BPQ32 RMS Application
|
||
|
|
RIGCONTROL COM2 19200 ICOM IC700 70 4 14.103/U1W 14.112/U1 18.1/U1N 10.12/L1
|
||
|
|
|
||
|
|
|
||
|
|
PSKA 140 ; PSK TX Output level.
|
||
|
|
FSKA 100 ; TX Level for FSK modes.
|
||
|
|
|
||
|
|
ENDPORT
|
||
|
|
|
||
|
|
PORT
|
||
|
|
ID=KISS COM53
|
||
|
|
TYPE=ASYNC
|
||
|
|
PROTOCOL=KISS
|
||
|
|
COMPORT=53
|
||
|
|
SPEED=9600
|
||
|
|
INTLEVEL=4
|
||
|
|
CHANNEL=A
|
||
|
|
QUALITY=0
|
||
|
|
MAXFRAME=6
|
||
|
|
FULLDUP=0
|
||
|
|
FRACK=10000
|
||
|
|
RESPTIME=3000
|
||
|
|
RETRIES=10
|
||
|
|
PACLEN=200
|
||
|
|
TXDELAY=500
|
||
|
|
SLOTTIME=100
|
||
|
|
PERSIST=64
|
||
|
|
DIGIFLAG=1
|
||
|
|
;
|
||
|
|
; KISSOPTIONS=ACKMODE
|
||
|
|
; KISSOPTIONS=POLLED,CHECKSUM
|
||
|
|
|
||
|
|
UNPROTO=FBB
|
||
|
|
ENDPORT
|
||
|
|
|
||
|
|
PORT
|
||
|
|
ID=VKISS COM2 Link to MIXW
|
||
|
|
DRIVER=BPQVKISS
|
||
|
|
QUALITY=200
|
||
|
|
COMPORT=2
|
||
|
|
CHANNEL=A
|
||
|
|
MAXFRAME=4
|
||
|
|
FRACK=5000
|
||
|
|
RESPTIME=1000
|
||
|
|
RETRIES=10
|
||
|
|
PACLEN=120
|
||
|
|
DIGIFLAG=1
|
||
|
|
DIGIMASK=65535 ; Digi UI Frames to all ports
|
||
|
|
|
||
|
|
ENDPORT
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
PORT
|
||
|
|
ID=AGW Port 1
|
||
|
|
DRIVER=BPQtoAGW
|
||
|
|
QUALITY=0
|
||
|
|
IOADDR=1F41
|
||
|
|
CHANNEL=A
|
||
|
|
MAXFRAME=4
|
||
|
|
FRACK=7000
|
||
|
|
RESPTIME=1000
|
||
|
|
RETRIES=10
|
||
|
|
PACLEN=120
|
||
|
|
UNPROTO=MAIL ; DEFAULT UNPROTO ADDR
|
||
|
|
;
|
||
|
|
ENDPORT
|
||
|
|
|
||
|
|
|
||
|
|
ROUTES:
|
||
|
|
;
|
||
|
|
; ROUTES TO LOCK IN
|
||
|
|
;
|
||
|
|
; specify Callsign, Quality and Port. You can now also specify
|
||
|
|
; MAXFRAME, FRACK, PACLEN (in that order) to override the port
|
||
|
|
; defaults.
|
||
|
|
;
|
||
|
|
;
|
||
|
|
AE5E-14,200,2,0,0,0,2 ; No Keepalives
|
||
|
|
;G4RFG,0,1 ; Marginal, So lock out by setting QUALITY = 0
|
||
|
|
;G0GDR-1,100,2,1,6000,100 ; not always very good, so MAXFRAME = 1
|
||
|
|
***
|
||
|
|
;
|
||
|
|
; APPLICATIONS SUPPORTED
|
||
|
|
;
|
||
|
|
; NAMES STARTING WITH * ARE NOT INCLUDED IN 'VALID COMMANDS' DISPALY
|
||
|
|
;
|
||
|
|
|
||
|
|
APPLICATION 1,RMS,,GM8BPQ-10,BPQRMS,0
|
||
|
|
APPLICATION 2,CHAT,,G8BPQ-4,BPQCHT,255
|
||
|
|
APPLICATION 3,FBB,,GM8BPQ-3,BPQFBB,0
|
||
|
|
APPLICATION 4,BBS,,G8BPQ,BPQBBS,255
|