New upstream & Packaging tidy
This commit is contained in:
parent
94179f117a
commit
5f9fb109ff
SSH key fingerprint:
SHA256:Y6XbnzN0FEB1R/exPF5hUbHUgE/Nn7M1uT566fxo6pE
23
debian/README.Debian
vendored
Normal file
23
debian/README.Debian
vendored
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
README for linbpq on Debian
|
||||
===========================
|
||||
|
||||
Please see https://wiki.oarc.uk/packet:linbpq-apt-installation for this guide
|
||||
|
||||
# Set config
|
||||
Copy the config, edit it & set permissions.
|
||||
The permissions are so linbpq web interface can edit the config.
|
||||
|
||||
sudo mv /usr/share/doc/linbpq/examples/bpq32.cfg /etc/bpq32.cfg
|
||||
sudo nano /etc/bpq32.cfg
|
||||
sudo chown :linbpq /etc/bpq32.cfg
|
||||
sudo chmod 644 /etc/bpq32.cfg
|
||||
|
||||
# Start linbpq
|
||||
|
||||
sudo systemctl start linbpq
|
||||
|
||||
# Access your node
|
||||
|
||||
It shall be available by accessing http://localhost:8008 in the browser or telnet localhost 8010
|
||||
|
||||
-- Dave Hibberd <hibby@debian.org> Tue, 26 Mar 2024 00:53:42 +0000
|
||||
49
debian/bpq32.cfg
vendored
Normal file
49
debian/bpq32.cfg
vendored
Normal file
|
|
@ -0,0 +1,49 @@
|
|||
SIMPLE
|
||||
NODECALL=MB7NAA
|
||||
NODEALIAS=AANODE
|
||||
LOCATOR=AA00aa
|
||||
PASSWORD=xxxxxxxx
|
||||
AUTOSAVE=1
|
||||
NODESINTERVAL=10
|
||||
MINQUAL=10
|
||||
CTEXT:
|
||||
Thanks for connecting.
|
||||
Type ? for help.
|
||||
***
|
||||
PORT
|
||||
PORTNUM=1
|
||||
ID=VHF
|
||||
TYPE=ASYNC
|
||||
PROTOCOL=KISS
|
||||
KISSOPTIONS=ACKMODE
|
||||
COMPORT=/dev/ttyACM0
|
||||
SPEED=57600
|
||||
FRACK=4000
|
||||
PACLEN=150
|
||||
DIGIFLAG=0
|
||||
QUALITY=192
|
||||
MINQUAL=20
|
||||
ENDPORT
|
||||
|
||||
|
||||
PORT
|
||||
PORTNUM=9
|
||||
ID=Telnet
|
||||
DRIVER=Telnet
|
||||
CONFIG
|
||||
LOGGING=1
|
||||
CMS=1
|
||||
DisconnectOnClose=1
|
||||
TCPPORT=8010
|
||||
FBBPORT=8011
|
||||
HTTPPORT=8008
|
||||
LOGINPROMPT=user:
|
||||
PASSWORDPROMPT=password:
|
||||
MAXSESSIONS=10
|
||||
CTEXT=Thanks for connecting\n Enter ? for list of commands\n\n
|
||||
USER=username,xxxxxxxx,m0aaa,,SYSOP
|
||||
ENDPORT
|
||||
|
||||
LINCHAT
|
||||
|
||||
APPLICATION 1,CHAT,,MB7NAA-9,AACHAT,255
|
||||
9
debian/changelog
vendored
9
debian/changelog
vendored
|
|
@ -1,3 +1,12 @@
|
|||
linbpq (6.0.24.33-1) UNRELEASED; urgency=medium
|
||||
|
||||
* Upstream bump
|
||||
* Moved config file to examples
|
||||
* Updated service to fail on no config
|
||||
* Added helpful README.Debian
|
||||
|
||||
-- Dave Hibberd <hibby@debian.org> Tue, 26 Mar 2024 00:53:42 +0000
|
||||
|
||||
linbpq (6.0.24.30-1) unstable; urgency=medium
|
||||
|
||||
* Upstream bump
|
||||
|
|
|
|||
1
debian/install
vendored
1
debian/install
vendored
|
|
@ -1 +0,0 @@
|
|||
debian/templates/bpq32.cfg etc/
|
||||
1
debian/linbpq.examples
vendored
Normal file
1
debian/linbpq.examples
vendored
Normal file
|
|
@ -0,0 +1 @@
|
|||
debian/bpq32.cfg
|
||||
1
debian/linbpq.service
vendored
1
debian/linbpq.service
vendored
|
|
@ -4,6 +4,7 @@ After=network.target
|
|||
[Service]
|
||||
ExecStart=/usr/sbin/linbpq -c /etc -d /opt/oarc/bpq -l /opt/oarc/bpq
|
||||
WorkingDirectory=/opt/oarc/bpq
|
||||
ConditionPathExists=/etc/bpq32.cfg
|
||||
Restart=always
|
||||
User=linbpq
|
||||
Group=linbpq
|
||||
|
|
|
|||
425
debian/templates/bpq32.cfg
vendored
425
debian/templates/bpq32.cfg
vendored
|
|
@ -1,425 +0,0 @@
|
|||
;
|
||||
;
|
||||
; CONFIGURATION FILE FOR G8BPQ SWITCH SOFTWARE
|
||||
;
|
||||
; The order of parameters in not important, but they
|
||||
; all must be specified - there are no defaults
|
||||
;
|
||||
PASSWORD=ABCDEFGHILKLMNOPQRSTUVWXY ; SYSOP Passord
|
||||
|
||||
LOCATOR=IO68VL ; Enable Map Reporting
|
||||
MAPCOMMENT=BPQ32 Test Node<BR>Skigersta, Isle of Lewis
|
||||
|
||||
;
|
||||
;
|
||||
; BBS enables the Application support system. If you have specified any of the APPLnCALLS,
|
||||
; you should set BBS to 1.
|
||||
;
|
||||
BBS=1 ; INCLUDE BBS SUPPORT
|
||||
;
|
||||
; NODE
|
||||
NODE=1 ; INCLUDE SWITCH SUPPORT
|
||||
|
||||
|
||||
|
||||
; The NODES and ROUTES tables can be saved, so that they can be reloaded when the software is restarted,
|
||||
; rather than having to wait for the tables to be rebuilt. There is a program SAVENODES.exe and a command
|
||||
; to the BPQ32 console to to this. By Setting AUTOSAVE=1, the tables will be saved each time the softare closes
|
||||
|
||||
AUTOSAVE=1 ; Save Nodes File before exiting
|
||||
|
||||
;
|
||||
; Station Identification.
|
||||
;
|
||||
; If a user connects to the NODE Callsign or Alias, he is linked
|
||||
; to the switch code, and can use normal NetRom/TheNet commands
|
||||
;
|
||||
; If he connects to an Application Callsign or Alias he will be connected
|
||||
; directly to the corresponding application. If not available, the connect will
|
||||
; be rejected. See the section on Application Calls towards the bottom of the file for
|
||||
; more information.
|
||||
;
|
||||
; Note that for compatibility with the DOS version, and older versions of BPQ32, BBSCALL is an alias for APPL1CALL,
|
||||
; and BBSALIAS is an alias for APPL1ALIAS. If both BBSCALL and APPL1CALL are specified, the BBSCALL will be ignored.
|
||||
;
|
||||
|
||||
NODECALL=G8BPQ-2 ; NODE CALLSIGN
|
||||
NODEALIAS=BPQ
|
||||
|
||||
; 'ID' MESSAGE - SENT EVERY IDINTERVAL MINS
|
||||
;
|
||||
; WILL BE ADDRESSED FROM THE PORT CALLSIGN (IF DEFINED)
|
||||
; ELSE FROM THE NODE CALL
|
||||
;
|
||||
; The main purpose of this is to satisfy the requrements of those administations that require a regular station
|
||||
; identification in the same mode as used for communication.
|
||||
|
||||
IDMSG:
|
||||
Network node (BPQ)
|
||||
***
|
||||
;
|
||||
|
||||
; 'I' COMMAND TEXT
|
||||
;
|
||||
;
|
||||
INFOMSG:
|
||||
G8BPQ Win32 Test Switch, Skigersta, Isle of Lewis.
|
||||
***
|
||||
|
||||
; BTEXT is the default beacon sent by the Node. Note that application programs may change this, or
|
||||
; generate their own beacons.
|
||||
|
||||
; An APRS compatible position may be included.
|
||||
|
||||
BTEXT:
|
||||
=5828.54N/00612.69W- {BPQ32}
|
||||
G8BPQ's Test Node
|
||||
***
|
||||
|
||||
IDINTERVAL=15 ; 'ID' BROADCAST INTERVAL (UK Regs require an AX25 ID every 15 mins)
|
||||
BTINTERVAL=15 ; BTEXT is sent at this interval
|
||||
|
||||
;
|
||||
; CTEXT - Normally will only be sent when someone connects to
|
||||
; the NODE ALIAS at level 2. If FULL_CTEXT is set to 1, it
|
||||
; will be sent to all connectees. Note that this could confuse BBS
|
||||
; forwarding connect scripts.
|
||||
;
|
||||
CTEXT:
|
||||
Welcome to G8BPQ's Test Switch in Skigersta
|
||||
Type ? for list of available commands.
|
||||
***
|
||||
|
||||
FULL_CTEXT=0 ; SEND CTEXT TO EVERYBODY
|
||||
|
||||
HFCTEXT=BPQ32 Node, Skigersta
|
||||
|
||||
; Network System Parameters.
|
||||
;
|
||||
; These are my values. Many other node sysops use other values. If in doubt, liase with
|
||||
; those running nodes that you link to
|
||||
|
||||
OBSINIT=5 ; INITIAL OBSOLESCENCE VALUE
|
||||
OBSMIN=4 ; MINIMUM TO BROADCAST
|
||||
NODESINTERVAL=60 ; 'NODES' INTERVAL IN MINS
|
||||
|
||||
L3TIMETOLIVE=25 ; MAX L3 HOPS
|
||||
L4RETRIES=4; ; LEVEL 4 RETRY COUNT
|
||||
;
|
||||
L4TIMEOUT=60; ; LEVEL 4 TIMEOUT
|
||||
L4DELAY=10 ; LEVEL 4 DELAYED ACK TIMER
|
||||
L4WINDOW=4 ; DEFAULT LEVEL 4 WINDOW
|
||||
;
|
||||
MINQUAL=140 ; MINIMUM QUALITY TO ADD TO NODES TABLE
|
||||
|
||||
|
||||
|
||||
; The following MAX params set the limits for various tables.
|
||||
;
|
||||
; Although significantly larger values can be used, a common area is used
|
||||
; for these tables and the buffer pool, so don't increase them more than
|
||||
; necessary.
|
||||
|
||||
MAXLINKS=100 ; MAX LEVEL 2 LINKS (UP,DOWN AND INTERNODE)
|
||||
MAXNODES=300; ; MAX NODES IN SYSTEM
|
||||
MAXROUTES=30 ; MAX ADJACENT NODES
|
||||
MAXCIRCUITS=150 ; NUMBER OF L4 CIRCUITS
|
||||
|
||||
|
||||
|
||||
BUFFERS=999 ; PACKET BUFFERS - 999 MEANS ALLOCATE AS MANY
|
||||
; AS POSSIBLE - NORMALLY ABOUT 600, DEPENDING
|
||||
; ON OTHER TABLE SIZES
|
||||
;
|
||||
; TNC DEFAULT PARAMS
|
||||
;
|
||||
PACLEN=236 ; MAX PACKET SIZE
|
||||
;
|
||||
; PACLEN is a problem! The ideal size depends on the link(s) over
|
||||
; which a packet will be sent. For a session involving another node,
|
||||
; we have no idea what is at the far end. Ideally each node should have
|
||||
; the capability to combine and then refragment messages to suit each
|
||||
; link segment - maybe when there are more of my nodes about than 'real'
|
||||
; ones, i'll do it. When the node is accessed directly, things are a
|
||||
; bit easier, as we know at least something about the link.
|
||||
; So there are two PACLEN params, one here and
|
||||
; one in the PORTS section. This one is used to set the initial value
|
||||
; for sessions via other nodes, and for sessions initiated from here.
|
||||
; The other is used for incoming direct (Level 2) sessions. In all cases
|
||||
; the Node PACLEN command can be used to override the defaults.
|
||||
;
|
||||
; 236 is the largest that can be sent over a NETROM link without fragmetation.
|
||||
; so don't go above this unless you don't have ant NETROM links.
|
||||
;
|
||||
; Level 2 Parameters
|
||||
;
|
||||
; Most Level 2 parametes are specified in the PORTS section'
|
||||
;
|
||||
T3=180 ; LINK VALIDATION TIMER (3 MINS)
|
||||
IDLETIME=900 ; IDLE LINK SHUTDOWN TIMER (15 MINS)
|
||||
;
|
||||
;
|
||||
HIDENODES=0 ; IF SET TO 1, NODES STARTING WITH # WILL
|
||||
; ONLY BE DISPLAYED BY A NODES * COMMAND
|
||||
;
|
||||
; THE *** LINKED COMMAND IS INTENDED FOR USE BY GATEWAY SOFTWARE, AND
|
||||
; CONCERN HAS BEEN EXPRESSED THAT IT COULD BE MISUSED. I RECOMMEND THAT
|
||||
; IT IS DISABLED IF NOT NEEDED.
|
||||
;
|
||||
ENABLE_LINKED=A ; CONTROLS PROCESSING OF *** LINKED COMMAND
|
||||
; Y ALLOWS UNRESTRICTED USE
|
||||
; A ALLOWS USE BY APPLICATION PROGRAM
|
||||
; N (OR ANY OTHER VALUE) DISABLE
|
||||
;
|
||||
; AX25 PORT DEFINITIONS
|
||||
;
|
||||
; These define the external links - normally to radios, but possibly
|
||||
; to other computers, modems, etc.
|
||||
;
|
||||
|
||||
; The KISS protocol supports dual port TNC's such as the KAM and KPC4.
|
||||
; You should define two port entries with the same IO addr
|
||||
; and SPEED - set CHANNEL=A for the first and B for the second.
|
||||
;
|
||||
; Note that all timer values are in ms intervals. Most TNC's
|
||||
; use different units for the various timers, so be careful!
|
||||
;
|
||||
; All parameters should be set for all ports, but not all
|
||||
; drivers support all features. For instance, the NETROM driver
|
||||
; does not use the TXDELAY, SLOTTIME and PERSIST values. The NETROM
|
||||
; driver only works in FULL DUPLEX mode, and the HDLC only in
|
||||
; HALF DUPLEX.
|
||||
;;
|
||||
; CWID works only on DRSI and PC120 cards, and can be suppressed
|
||||
; by omitting the parameter.
|
||||
;
|
||||
; BECAUSE OF OUR ODD LICENCING CONDITIONS YOU MAY WISH TO BAN
|
||||
; CONNECTIONS TO THE BBS CALLSIGN ON SOME PORTS - USERS MAY STILL
|
||||
; CONNECT USING L4, OR CONNECT TO THE NODE ADDR, AND USE BBS
|
||||
; COMMAND. PUT 'BBSFLAG=NOBBS' TO ACTIVATE THIS FUNCTION.
|
||||
; 'BBSFLAG=BBSOK', OR NO PARM, MEANS BEHAVE AS NORMAL
|
||||
;
|
||||
; You can have an extra callsign and alias for each
|
||||
; port for user access only. The callsigns defined in NODECALL and
|
||||
; BBSCALL are used for all networking activity.
|
||||
;
|
||||
|
||||
PORT
|
||||
ID=LOOPBACK
|
||||
TYPE=INTERNAL
|
||||
PROTOCOL=KISS
|
||||
CHANNEL=A
|
||||
QUALITY=0
|
||||
MAXFRAME=6
|
||||
FULLDUP=0
|
||||
FRACK=10000
|
||||
RESPTIME=3000
|
||||
RETRIES=10
|
||||
PACLEN=200
|
||||
TXDELAY=500
|
||||
SLOTTIME=100
|
||||
PERSIST=64
|
||||
DIGIFLAG=1
|
||||
UNPROTO=FBB
|
||||
ENDPORT
|
||||
|
||||
PORT
|
||||
ID=AXIP Link
|
||||
TYPE=EXTERNAL
|
||||
DLLNAME=BPQAXIP.DLL
|
||||
QUALITY=200
|
||||
MAXFRAME=4
|
||||
FRACK=5000
|
||||
RESPTIME=1000
|
||||
RETRIES=10
|
||||
PACLEN=236
|
||||
MINQUAL=150
|
||||
UNPROTO=FBB ; DEFAULT UNPROTO ADDR
|
||||
BCALL=GM8BPQ ; Call for Beacons
|
||||
|
||||
CONFIG
|
||||
|
||||
UDP 10093 # Optional. Enables UDP support, and defines the port
|
||||
# AX.IP listens on. You can specify more than one
|
||||
# UDP line if you need to listen on more than one port
|
||||
|
||||
MHEARD # Optional - opens a window to display a "Heard List"
|
||||
|
||||
BROADCAST NODES
|
||||
|
||||
MAP G8BPQ-7 G8BPQ.NO-IP.COM UDP 10093 B
|
||||
|
||||
; Steve Conrad, VE9SC, provides a service which displays a map of BPQMailChat
|
||||
; nodes dynamically updated: http://guardian.no-ip.org/bpqmap/ChatNetwork.htm
|
||||
; The following line causes your Chat Node to be included on the map.
|
||||
|
||||
MAP DUMMY chatmap.g8bpq.net UDP 10090
|
||||
|
||||
ENDPORT
|
||||
|
||||
PORT
|
||||
ID=BPQEther Link
|
||||
TYPE=EXTERNAL
|
||||
DLLNAME=BPQETHER.DLL
|
||||
QUALITY=200
|
||||
IOADDR=2
|
||||
CHANNEL=A
|
||||
MAXFRAME=7
|
||||
FRACK=5000
|
||||
RESPTIME=1000
|
||||
RETRIES=10
|
||||
PACLEN=236
|
||||
MINQUAL=255
|
||||
UNPROTO=MAIL ; DEFAULT UNPROTO ADDR
|
||||
|
||||
CONFIG
|
||||
|
||||
TXMODE BPQ # BPQ or RLI
|
||||
RXMODE BPQ # BPQ or RLI
|
||||
TYPE 08FF # Ethernet Type
|
||||
DEST 01-42-50-51-00-00 # Target Ethernet Addr - Multicast as used in DOS BPQCODE
|
||||
SOURCE 02-FF-60-BA-5C-9E # Source Ethernet Addr
|
||||
ADAPTER \Device\NPF_{959094A1-C20D-4FFD-AF68-D43229E4854B} # Adapter Name
|
||||
|
||||
ENDPORT
|
||||
|
||||
;
|
||||
; WINMOR Port
|
||||
;
|
||||
PORT
|
||||
ID=WINMOR Port 1
|
||||
TYPE=EXTERNAL
|
||||
DLLNAME=WINMOR.DLL
|
||||
INTERLOCK=4
|
||||
CONFIG
|
||||
ADDR 127.0.0.1 8506 PTT DTR
|
||||
RIGCONTROL COM61 4800 ICOM IC718 5E 5 3.573/u1nA1 7.077/u1 10.133/u1 10.146/u1wA3 14.1105/u1w
|
||||
CWID True
|
||||
BW 1600
|
||||
DRIVELEVEL 100
|
||||
BUSYLOCK False
|
||||
|
||||
ENDPORT
|
||||
|
||||
PORT
|
||||
ID=KAM PACTOR COM 100
|
||||
TYPE=EXTERNAL
|
||||
PROTOCOL=PACTOR
|
||||
IOADDR=64
|
||||
SPEED=9600
|
||||
DLLNAME=KAMPACTOR.DLL
|
||||
QUALITY=0
|
||||
INTERLOCK=4
|
||||
|
||||
CONFIG ; Driver-Specific Configuration
|
||||
|
||||
APPL RMS ; Autoconnect to BPQ32 RMS Application
|
||||
RIGCONTROL COM2 19200 ICOM IC700 70 4 14.103/U1W 14.112/U1 18.1/U1N 10.12/L1
|
||||
|
||||
|
||||
OLDMODE ; Optional - Causes controller to be set to PACTOR mode instead of TOR mode
|
||||
XMITLVL 50/35;
|
||||
|
||||
ENDPORT
|
||||
|
||||
PORT
|
||||
ID=SCS PACTOR COM 103
|
||||
DRIVER=SCSPACTOR
|
||||
COMPORT=103
|
||||
SPEED=38400
|
||||
PORTCALL=GM8BPQ
|
||||
|
||||
CONFIG ; Driver-Specific Configuration
|
||||
|
||||
APPL RMS ; Autoconnect to BPQ32 RMS Application
|
||||
RIGCONTROL COM2 19200 ICOM IC700 70 4 14.103/U1W 14.112/U1 18.1/U1N 10.12/L1
|
||||
|
||||
|
||||
PSKA 140 ; PSK TX Output level.
|
||||
FSKA 100 ; TX Level for FSK modes.
|
||||
|
||||
ENDPORT
|
||||
|
||||
PORT
|
||||
ID=KISS COM53
|
||||
TYPE=ASYNC
|
||||
PROTOCOL=KISS
|
||||
COMPORT=53
|
||||
SPEED=9600
|
||||
INTLEVEL=4
|
||||
CHANNEL=A
|
||||
QUALITY=0
|
||||
MAXFRAME=6
|
||||
FULLDUP=0
|
||||
FRACK=10000
|
||||
RESPTIME=3000
|
||||
RETRIES=10
|
||||
PACLEN=200
|
||||
TXDELAY=500
|
||||
SLOTTIME=100
|
||||
PERSIST=64
|
||||
DIGIFLAG=1
|
||||
;
|
||||
; KISSOPTIONS=ACKMODE
|
||||
; KISSOPTIONS=POLLED,CHECKSUM
|
||||
|
||||
UNPROTO=FBB
|
||||
ENDPORT
|
||||
|
||||
PORT
|
||||
ID=VKISS COM2 Link to MIXW
|
||||
DRIVER=BPQVKISS
|
||||
QUALITY=200
|
||||
COMPORT=2
|
||||
CHANNEL=A
|
||||
MAXFRAME=4
|
||||
FRACK=5000
|
||||
RESPTIME=1000
|
||||
RETRIES=10
|
||||
PACLEN=120
|
||||
DIGIFLAG=1
|
||||
DIGIMASK=65535 ; Digi UI Frames to all ports
|
||||
|
||||
ENDPORT
|
||||
|
||||
|
||||
|
||||
PORT
|
||||
ID=AGW Port 1
|
||||
DRIVER=BPQtoAGW
|
||||
QUALITY=0
|
||||
IOADDR=1F41
|
||||
CHANNEL=A
|
||||
MAXFRAME=4
|
||||
FRACK=7000
|
||||
RESPTIME=1000
|
||||
RETRIES=10
|
||||
PACLEN=120
|
||||
UNPROTO=MAIL ; DEFAULT UNPROTO ADDR
|
||||
;
|
||||
ENDPORT
|
||||
|
||||
|
||||
ROUTES:
|
||||
;
|
||||
; ROUTES TO LOCK IN
|
||||
;
|
||||
; specify Callsign, Quality and Port. You can now also specify
|
||||
; MAXFRAME, FRACK, PACLEN (in that order) to override the port
|
||||
; defaults.
|
||||
;
|
||||
;
|
||||
AE5E-14,200,2,0,0,0,2 ; No Keepalives
|
||||
;G4RFG,0,1 ; Marginal, So lock out by setting QUALITY = 0
|
||||
;G0GDR-1,100,2,1,6000,100 ; not always very good, so MAXFRAME = 1
|
||||
***
|
||||
;
|
||||
; APPLICATIONS SUPPORTED
|
||||
;
|
||||
; NAMES STARTING WITH * ARE NOT INCLUDED IN 'VALID COMMANDS' DISPALY
|
||||
;
|
||||
|
||||
APPLICATION 1,RMS,,GM8BPQ-10,BPQRMS,0
|
||||
APPLICATION 2,CHAT,,G8BPQ-4,BPQCHT,255
|
||||
APPLICATION 3,FBB,,GM8BPQ-3,BPQFBB,0
|
||||
APPLICATION 4,BBS,,G8BPQ,BPQBBS,255
|
||||
Loading…
Reference in a new issue