6.0.23.29

APRSCode.c

@@ -241,6 +241,7 @@ char SYMSET = '/';
 
 BOOL TraceDigi = FALSE;					// Add Trace to packets relayed on Digi Calls
 BOOL SATGate = FALSE;					// Delay Gating to IS directly heard packets
+BOOL RXOnly = FALSE;					// Run as RX only IGATE, ie don't gate anything to RF
 
 BOOL DefaultLocalTime = FALSE;
 BOOL DefaultDistKM = FALSE;
@@ -1272,7 +1273,7 @@ Dll VOID APIENTRY Poll_APRS()
 				|| memcmp(AdjBuff->ORIGIN, axRFONLY, 6) == 0
 				|| DigisUsed > MaxDigisforIS)
 
-				// TOo many digis or Last digis is NOGATE or RFONLY - dont send to IS
+				// Too many digis or Last digis is NOGATE or RFONLY - dont send to IS
 
 				NoGate = TRUE;
 		}
@@ -1418,7 +1419,7 @@ Dll VOID APIENTRY Poll_APRS()
 			MH->IGate = TRUE;			// if we've seen msgs to TCPIP, it must be an Igate
 		}
 
-		if (NoGate)
+		if (NoGate || RXOnly)
 			goto NoIS;
 
 		// I think all PID F0 UI frames go to APRS-IS,
@@ -1452,7 +1453,23 @@ Dll VOID APIENTRY Poll_APRS()
 
 		if (APRSISOpen && CrossPortMap[Port][0])	// No point if not open
 		{
-// was done above     len = sprintf(ISMsg, "%s>%s,qAR,%s:%s", ptr1, ptr4, APRSCall, Payload);
+			// was done above     len = sprintf(ISMsg, "%s>%s,qAR,%s:%s", ptr1, ptr4, APRSCall, Payload);
+
+			if (BeacontoIS == 0)
+			{
+				// Don't send anything we've received as an echo
+
+				char SaveCall[7];
+				memcpy(SaveCall, &monbuff->ORIGIN, 7);
+				SaveCall[6] &= 0x7e;	// Mask End of address bit
+
+				if (memcmp(SaveCall, AXCall, 7) == 0)		// We sent it
+				{
+					// Should we check for being received via digi? - not for now 
+
+					goto NoIS;
+				}
+			}
 
 			if (SATGate && (DigisUsed == 0))
 			{
@@ -1471,7 +1488,7 @@ Dll VOID APIENTRY Poll_APRS()
 			}
 
 			ISSend(sock, ISMsg, len, 0);
-	
+
 			ptr1 = strchr(ISMsg, 13);
 			if (ptr1) *ptr1 = 0;
 //			Debugprintf(">%s", ISMsg);
@@ -1988,6 +2005,12 @@ static int APRSProcessLine(char * buf)
 		return TRUE;
 	}
 
+	if (_stricmp(ptr, "RXOnly") == 0)
+	{
+		RXOnly = TRUE;
+		return TRUE;
+	}
+
 	if (_stricmp(ptr, "DISTKM") == 0)
 	{
 		DefaultDistKM = TRUE;
@@ -2794,7 +2817,7 @@ VOID SendIStatus()
 
 	IStatusCounter = 3600;		// One per hour
 
-	if (APRSISOpen && BeacontoIS)
+	if (APRSISOpen && BeacontoIS && RXOnly == 0)
 	{
 		Msg.PID = 0xf0;
 		Msg.CTL = 3;
@@ -3740,7 +3763,7 @@ void PollGPSIn()
 				GPSMsg[len] = 0;
 
 				if (Check0183CheckSum(GPSMsg, len))
-					if (memcmp(&GPSMsg[1], "GPRMC", 5) == 0)
+					if (memcmp(&GPSMsg[3], "RMC", 3) == 0)
 						DecodeRMC(GPSMsg, len);	
 
 				portptr->gpsinptr -= (int)len;			// bytes left
@@ -4174,7 +4197,7 @@ static VOID ProcessReceivedData(SOCKET TCPSock)
 			}
 			else
 			{			
-				if (memcmp(UDPMsg, "$GPRMC", 6) == 0)
+				if (memcmp(&UDPMsg[3], "RMC", 3) == 0)
 					DecodeRMC(UDPMsg, Len);
 
 				else if (memcmp(UDPMsg, "!AIVDM", 6) == 0)

BBSUtilities.c

@@ -43,6 +43,9 @@ RECT ConsoleRect;
 BOOL OpenConsole;
 BOOL OpenMon;
 
+int reportNewMesageEvents = 0;
+
+
 extern struct ConsoleInfo BBSConsole;
 
 extern char LOC[7];
@@ -199,6 +202,14 @@ BOOL SendNewUserMessage = TRUE;
 BOOL AllowAnon = FALSE;
 BOOL UserCantKillT = FALSE;
 
+typedef int (WINAPI FAR *FARPROCX)();
+FARPROCX pRunEventProgram;
+
+int RunEventProgram(char * Program, char * Param);
+
+
+extern BOOL EventsEnabled;
+
 #define BPQHOSTSTREAMS	64
 
 // Although externally streams are numbered 1 to 64, internally offsets are 0 - 63
@@ -4796,7 +4807,7 @@ char * ReadInfoFile(char * File)
 	FILE * hFile;
 	char * MsgBytes;
 	struct stat STAT;
-	char * ptr1 = 0;
+	char * ptr1 = 0, * ptr2;
  
 	sprintf_s(MsgFile, sizeof(MsgFile), "%s/%s", BaseDir, File);
 
@@ -4816,13 +4827,20 @@ char * ReadInfoFile(char * File)
 
 	fclose(hFile);
 
-	MsgBytes[FileSize]=0;
+	MsgBytes[FileSize] = 0;
 
-#ifndef WIN32
+	ptr1 = MsgBytes;
 
-	// Replace LF with CR
+	// Replace LF or CRLF with CR
 
-	// Remove lf chars
+	// First remove cr from crlf
+
+	while(ptr2 = strstr(ptr1, "\r\n"))
+	{
+		memmove(ptr2, ptr2 + 1, strlen(ptr2));
+	}
+
+	// Now replace lf with cr
 
 	ptr1 = MsgBytes;
 
@@ -4833,7 +4851,6 @@ char * ReadInfoFile(char * File)
 
 		ptr1++;
 	}
-#endif
 
 	return MsgBytes;
 }
@@ -6295,6 +6312,33 @@ nextline:
 	SaveMessageDatabase();
 	SaveBIDDatabase();
 
+	// If Event Notifications enabled report a new message event
+
+	if (reportNewMesageEvents)
+	{
+		char msg[200];
+
+		//12345 B 2053 TEST@ALL F6FBB 920325 This is the subject
+
+		struct tm *tm = gmtime((time_t *)&Msg->datecreated);	
+
+		sprintf_s(msg, sizeof(msg),"%-6d %c %6d %-13s %-6s %02d%02d%02d %s\r",
+			Msg->number, Msg->type, Msg->length, Msg->to,
+			Msg->from, tm->tm_year-100, tm->tm_mon+1, tm->tm_mday, Msg->title);
+
+#ifdef WIN32
+		if (pRunEventProgram)
+			pRunEventProgram("MailNewMsg.exe", msg);
+#else
+		{
+			char prog[256];
+			sprintf(prog, "%s/%s", BPQDirectory, "MailNewMsg");
+			RunEventProgram(prog, msg);
+		}
+#endif
+	}
+
+
 	if (EnableUI)
 #ifdef LINBPQ
 		SendMsgUI(Msg);	

BPQChat.vcproj

@@ -357,18 +357,6 @@
 			Filter="h;hpp;hxx;hm;inl;inc;xsd"
 			UniqueIdentifier="{93995380-89BD-4b04-88EB-625FBE52EBFB}"
 			>
-			<File
-				RelativePath="..\BPQChat\BPQChat.h"
-				>
-			</File>
-			<File
-				RelativePath="..\BPQChat\Resource.h"
-				>
-			</File>
-			<File
-				RelativePath="..\BPQChat\stdafx.h"
-				>
-			</File>
 		</Filter>
 		<Filter
 			Name="Resource Files"

BPQMail.c

@@ -1102,6 +1102,7 @@
 //	Fix ' in Webmail subject (8)
 //	Change web buttons to white on black when pressed (10)
 //	Add auto-refresh option to Webmail index page (25)
+//	Fix displaying help and info files with crlf line endings on Linux (28)
 
 #include "bpqmail.h"
 #define MAIL

Bpq32.c

@@ -1122,6 +1122,10 @@ along with LinBPQ/BPQ32.  If not, see http://www.gnu.org/licenses
 //	Add SmartID for bridged frames - Send ID only if packets sent recently (26)
 //	Add option to save and restore received APRS messages (27)
 //	Add mechanism to run a user program on certain events (27)
+//	If BeacontoIS is zero don't Gate any of our messages received locally to APRS-IS (28)
+//	Add Node Help command (28)
+//	Add APRS Igate RXOnly option (29)
+//	Fix RMC message handling with prefixes other than GP
 
 
 #define CKernel

CBPQ32.vcproj.SKIGACER.johnw.user

@@ -37,7 +37,7 @@
 			Name="Release|Win32"
 			>
 			<DebugSettings
-				Command=""
+				Command="C:\DevProgs\BPQ32\bpq32.exe"
 				WorkingDirectory=""
 				CommandArguments=""
 				Attach="false"

ChatUsers.txt

@@ -1,5 +1,4 @@
 IZ4FVW 0 Giulio Cesena ITA JN64ce, 1k2 bps radio link¬55¬0
-GM8BPQ 40 John ?_qthｬ14ｬ0
 N5UXT 0 Angelo th New Orleans, La¬99¬0
 N0NJY 0 Rick Oak Island, NC¬76¬0
 KB8UVN 0 Matt Johnstown, Ohio¬95¬0
@@ -14,3 +13,4 @@ WE1H 0 Matt Merrimack, NH
 W9IKU 0 Greg Portage, Wisconsin USA¬55¬0
 KA3VSP 0 Brian New Castle, DE¬91¬0
 G8BPQ 0 John Nottingham¬26¬0
+GM8BPQ 40 John ?_qthｬ14ｬ0

ChatUtilities.c

@@ -320,7 +320,7 @@ char * ReadInfoFile(char * File)
 	FILE * hFile;
 	char * MsgBytes;
 	struct stat STAT;
-	char * ptr1 = 0;
+	char * ptr1 = 0, * ptr2;
  
 	sprintf_s(MsgFile, sizeof(MsgFile), "%s/%s", GetBPQDirectory(), File);
 
@@ -342,11 +342,16 @@ char * ReadInfoFile(char * File)
 
 	MsgBytes[FileSize]=0;
 
-#ifndef WIN32
+	// Replace LF or CRLF with CR
 
-	// Replace LF with CR
+	// First remove cr from crlf
 
-	// Remove lf chars
+	while(ptr2 = strstr(ptr1, "\r\n"))
+	{
+		memmove(ptr2, ptr2 + 1, strlen(ptr2));
+	}
+
+	// Now replace lf with cr
 
 	ptr1 = MsgBytes;
 
@@ -357,7 +362,6 @@ char * ReadInfoFile(char * File)
 
 		ptr1++;
 	}
-#endif
 
 	return MsgBytes;
 }

ChatUtils.c

@@ -484,82 +484,6 @@ void TrytoSend()
 	}
 }
 
-
-void ChatFlush(ChatCIRCUIT * conn)
-{
-	int tosend, len, sent;
-	
-	// Try to send data to user. May be stopped by user paging or node flow control
-
-	//	UCHAR * OutputQueue;		// Messages to user
-	//	int OutputQueueLength;		// Total Malloc'ed size. Also Put Pointer for next Message
-	//	int OutputGetPointer;		// Next byte to send. When Getpointer = Quele Length all is sent - free the buffer and start again.
-
-	//	BOOL Paging;				// Set if user wants paging
-	//	int LinesSent;				// Count when paging
-	//	int PageLen;				// Lines per page
-
-
-	if (conn->OutputQueue == NULL)
-	{
-		// Nothing to send. If Close after Flush is set, disconnect
-
-		if (conn->CloseAfterFlush)
-		{
-			conn->CloseAfterFlush--;
-			
-			if (conn->CloseAfterFlush)
-				return;
-
-			Disconnect(conn->BPQStream);
-		}
-
-		return;						// Nothing to send
-	}
-	tosend = conn->OutputQueueLength - conn->OutputGetPointer;
-
-	sent=0;
-
-	while (tosend > 0)
-	{
-		if (TXCount(conn->BPQStream) > 4)
-			return;						// Busy
-
-		if (tosend <= conn->paclen)
-			len=tosend;
-		else
-			len=conn->paclen;
-
-		GetSemaphore(&OutputSEM, 0);
-
-		SendUnbuffered(conn->BPQStream, &conn->OutputQueue[conn->OutputGetPointer], len);
-
-		conn->OutputGetPointer+=len;
-
-		FreeSemaphore(&OutputSEM);
-
-		tosend-=len;	
-		sent++;
-
-		if (sent > 4)
-			return;
-	}
-
-	// All Sent. Free buffers and reset pointers
-
-	ChatClearQueue(conn);
-}
-
-VOID ChatClearQueue(ChatCIRCUIT * conn)
-{
-	GetSemaphore(&OutputSEM, 0);
-
-	conn->OutputGetPointer=0;
-	conn->OutputQueueLength=0;
-
-	FreeSemaphore(&OutputSEM);
-}
-
 /*
 char * FormatDateAndTime(time_t Datim, BOOL DateOnly)
 {

Cmd.c

@@ -169,6 +169,9 @@ VOID FLMSG(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX * Us
 void ListExcludedCalls(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX * CMD);
 VOID APRSCMD(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX * CMD);
 VOID RECONFIGTELNET (TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX * CMD);
+VOID HELPCMD(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX * CMD);
+
+
 
 char * __cdecl Cmdprintf(TRANSPORTENTRY * Session, char * Bufferptr, const char * format, ...)
 {
@@ -4205,6 +4208,7 @@ CMDX COMMANDS[] =
 	"BYE         ",1,BYECMD,0,
 	"QUIT        ",1,BYECMD,0,
 	"INFO        ",1,CMDI00,0,
+	"HELP        ",1,HELPCMD,0,
 	"VERSION     ",1,CMDV00,0,
 	"NODES       ",1,CMDN00,0,
 	"LINKS       ",1,CMDL00,0,
@@ -5496,6 +5500,93 @@ BOOL isSYSOP(TRANSPORTENTRY * Session, char * Bufferptr)
 	return TRUE;
 }
 
+VOID HELPCMD(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX * CMD)
+{
+	int FileSize;
+	char MsgFile[MAX_PATH];
+	FILE * hFile;
+	char * MsgBytes;
+	struct stat STAT;
+	char * ptr1, * ptr, * ptr2;
+ 
+	sprintf_s(MsgFile, sizeof(MsgFile), "%s/%s", BPQDirectory, "NodeHelp.txt");
+
+	if (stat(MsgFile, &STAT) == -1)
+	{
+		Bufferptr = Cmdprintf(Session, Bufferptr, "Help file not found\r");
+		SendCommandReply(Session, REPLYBUFFER, (int)(Bufferptr - (char *)REPLYBUFFER));
+		return;
+	}
+
+	FileSize = STAT.st_size;
+
+	hFile = fopen(MsgFile, "rb");
+
+	if (hFile == NULL)
+	{
+		Bufferptr = Cmdprintf(Session, Bufferptr, "Help file not found\r");
+		SendCommandReply(Session, REPLYBUFFER, (int)(Bufferptr - (char *)REPLYBUFFER));
+		return;
+	}
+
+	MsgBytes = malloc(FileSize+1);
+
+	fread(MsgBytes, 1, FileSize, hFile); 
+
+	fclose(hFile);
+
+	MsgBytes[FileSize] = 0;
+
+	ptr1 = MsgBytes;
+
+	// Replace LF or CRLF with CR
+
+	// First remove cr from crlf
+
+	while(ptr2 = strstr(ptr1, "\r\n"))
+	{
+		memmove(ptr2, ptr2 + 1, strlen(ptr2));
+	}
+
+	// Now replace lf with cr
+
+	ptr1 = MsgBytes;
+
+	while (*ptr1)
+	{
+		if (*ptr1 == '\n')
+			*(ptr1) = '\r';
+
+		ptr1++;
+	}
+	
+	ptr = ptr1 = MsgBytes;
+
+	Bufferptr = Cmdprintf(Session, Bufferptr, "\r");
+
+	// Read and send a line at a time, converting any line endings into CR
+
+	while (*ptr1)
+	{
+		if (*ptr1 == '\r')
+		{
+			*(ptr1++) = 0;
+
+			Bufferptr = Cmdprintf(Session, Bufferptr, "%s\r", ptr);
+
+			ptr = ptr1;
+		}
+		else
+			ptr1++;
+	}
+
+	free(MsgBytes);
+	SendCommandReply(Session, REPLYBUFFER, (int)(Bufferptr - (char *)REPLYBUFFER));
+}
+
+
+
+
 
 
 

CommonCode.c

@@ -2407,9 +2407,6 @@ HANDLE OpenCOMPort(VOID * pPort, int speed, BOOL SetDTR, BOOL SetRTS, BOOL Quiet
 	struct termios term;
 	struct speed_struct *s;
 
-	// As Serial ports under linux can have all sorts of odd names, the code assumes that
-	// they are symlinked to a com1-com255 in the BPQ Directory (normally the one it is started from
-
 	if ((UINT)pPort < 256)
 		sprintf(Port, "%s/com%d", BPQDirectory, (int)pPort);
 	else

HanksRT.c

@@ -118,9 +118,71 @@ time_t RunningConnectScript = 0;
 //#define   free(p) 
 
 
+struct HistoryRec * History = NULL;
+int HistoryCount = 0;
+
+
 typedef int (WINAPI FAR *FARPROCX)();
 extern FARPROCX pRunEventProgram;
 
+int AddtoHistory(struct user_t * user, char * text)
+{
+	struct HistoryRec * Rec;
+	struct HistoryRec * ptr;
+	int n = 1;
+	char buf[512];
+	char Stamp[16];
+	struct tm * tm;
+	time_t Now = time(NULL);
+
+	// Don't want to grow indefinitely and fill memory. We only allow display upt 24 hours back, so if first record is older that that 
+	// remove and reuse it
+
+	if (History && History->Time  < Now - 86400)
+	{
+		Rec = History;
+		History = Rec->next;		// Remove from front of chain 
+	}
+	else
+		Rec = malloc(sizeof (struct HistoryRec));
+
+	memset(Rec, 0, sizeof (struct HistoryRec));
+
+	tm = gmtime(&Now);
+
+	sprintf(Stamp,"%02d:%02d ", tm->tm_hour, tm->tm_min);
+	sprintf(buf, "%s%-6.6s %s %c %s\r", Stamp, user->call, user->name, ':', text);
+
+	Rec->Time = Now;
+	
+	Rec->Topic = _strdup(user->topic->name);
+	Rec->Message = _strdup(buf);
+
+	if (History == NULL)
+		History = Rec;
+
+	else
+	{
+		ptr = History;
+
+		while (ptr && ptr->next)
+		{
+			n++;
+			ptr = ptr->next;
+		}
+
+		n++;
+		ptr->next = Rec;
+	}
+
+	return n;
+}
+
+
+
+
+
+
 int ChatIsUTF8(unsigned char *ptr, int len)
 {
 	int n; 
@@ -221,7 +283,6 @@ VOID * _zalloc_dbg(int len, int type, char * file, int line)
 	return ptr;
 }
 
-
 #endif
 
 VOID __cdecl nprintf(ChatCIRCUIT * conn, const char * format, ...)
@@ -268,22 +329,18 @@ int ChatQueueMsg(ChatCIRCUIT * conn, char * msg, int len)
 
 	//	UCHAR * OutputQueue;		// Messages to user
 	//	int OutputQueueLength;		// Total Malloc'ed size. Also Put Pointer for next Message
-	//	int OutputGetPointer;		// Next byte to send. When Getpointer = Quele Length all is sent - free the buffer and start again.
+	//	int OutputGetPointer;		// Next byte to send. When Getpointer = Queue Length all is sent - free the buffer and start again.
 
 	// Create or extend buffer
 
 	GetSemaphore(&OutputSEM, 0);
 
-	if (conn->OutputQueueLength + len > 9999)
+	while (conn->OutputQueueLength + len > conn->OutputQueueSize)
 	{
-		Debugprintf("Output Queue Overflow %d", conn->OutputQueueLength);
+		// Extend Queue
 
-		// Shouldn't clear buffer as this will corrupt any partly recevied message - just drop it
+		conn->OutputQueueSize += 4096;
-
+		conn->OutputQueue =  realloc(conn->OutputQueue, conn->OutputQueueSize);
-//		conn->OutputQueueLength = 0;
-//		conn->OutputGetPointer = 0;
-		FreeSemaphore(&OutputSEM);
-		return 0;							// or we will send a partial message
 	}
 
 	memcpy(&conn->OutputQueue[conn->OutputQueueLength], msg, len);
@@ -702,6 +759,52 @@ VOID ProcessChatLine(ChatCIRCUIT * conn, struct UserInfo * user, char* OrigBuffe
 			return;
 		}
 
+		if (_memicmp(&Buffer[1], "History", 7) == 0)
+		{
+			// Param is number of minutes to go back (max 24 hours)
+		
+			struct HistoryRec * ptr = History;
+			int interval = atoi(&Buffer[9]) * 60;
+			time_t start = time(NULL) - interval;
+			int n = HistoryCount;
+
+			if (interval < 1)
+			{
+				nprintf(conn, "Format is /history n, where n is history time in minutes\r");
+				conn->u.user->lastsendtime = time(NULL);
+				return;
+			}
+
+			if (interval > 1440)
+			{
+				nprintf(conn, "History is only held for 24 Hours (1440 Minutes)\r");
+				interval = 1440;				// Limit to 1 day
+			}
+
+			// Find first record to send
+
+			while (ptr)
+			{
+				if (ptr->Time > start)
+					break;
+				n--;
+				ptr = ptr->next;
+			}
+
+			// n  is records found
+		
+			while (ptr)
+			{
+				nprintf(conn, ptr->Message);
+				ptr = ptr->next;
+			}
+				
+			conn->u.user->lastsendtime = time(NULL);
+			return;
+		}
+
+		
+
 		if (_memicmp(&Buffer[1], "Keepalive", 4) == 0)
 		{
 			conn->u.user->rtflags ^= u_keepalive;
@@ -843,6 +946,8 @@ VOID ProcessChatLine(ChatCIRCUIT * conn, struct UserInfo * user, char* OrigBuffe
 		
 	text_tellu(conn->u.user, Buffer, NULL, o_topic); // To local users.
 
+	HistoryCount = AddtoHistory(conn->u.user, Buffer);
+
 	conn->u.user->lastrealmsgtime = conn->u.user->lastmsgtime = time(NULL);
 		
 	// Send to Linked nodes
@@ -2938,6 +3043,7 @@ int rt_cmd(ChatCIRCUIT *circuit, char * Buffer)
 				nputs(circuit, "/S CALL Text - Send Text to that station only.\r");
 				nputs(circuit, "/F - Force all links to be made.\r/K - Show Known nodes.\r");
 				nputs(circuit, "/B - Leave Chat and return to node.\r/QUIT - Leave Chat and disconnect from node.\r");
+				nputs(circuit, "/History nn - Display chat messages received in last nn minutes.\r");
 			}
 		}
 		return TRUE;
@@ -4165,6 +4271,7 @@ BOOL ChatInit()
 	return TRUE;
 }
 
+#endif
 
 void ChatFlush(ChatCIRCUIT * conn)
 {
@@ -4181,22 +4288,6 @@ void ChatFlush(ChatCIRCUIT * conn)
 	//	int PageLen;				// Lines per page
 
 
-	if (conn->OutputQueue == NULL)
-	{
-		// Nothing to send. If Close after Flush is set, disconnect
-
-		if (conn->CloseAfterFlush)
-		{
-			conn->CloseAfterFlush--;
-			
-			if (conn->CloseAfterFlush)
-				return;
-
-			Disconnect(conn->BPQStream);
-		}
-
-		return;						// Nothing to send
-	}
 	tosend = conn->OutputQueueLength - conn->OutputGetPointer;
 
 	sent = 0;
@@ -4233,9 +4324,6 @@ void ChatFlush(ChatCIRCUIT * conn)
 
 VOID ChatClearQueue(ChatCIRCUIT * conn)
 {
-	if (conn->OutputQueue == NULL)
-		return;
-
 	GetSemaphore(&OutputSEM, 0);
 	
 	conn->OutputGetPointer = 0;
@@ -4244,6 +4332,7 @@ VOID ChatClearQueue(ChatCIRCUIT * conn)
 	FreeSemaphore(&OutputSEM);
 }
 
+#ifdef LINBPQ
 void ChatTrytoSend()
 {
 	// call Flush on any connected streams with queued data

RTKnown.txt

@@ -1,25 +1,26 @@
-G8BPQ-1 1661431645
+G8BPQ-1 1669106746
-GM8BPQ-4 1661431604
+GM8BPQ-3 1669106749
-OH5RM-8 1661431604
+KB8UVN-6 1669106746
-G0BMH-4 1661431604
+N8BHL-6 1669106746
-AE5E-2 1661431604
+KF8MZ-6 1669106746
-MS0HFI-4 1661431604
+W8BAP-6 1669106746
-PE1RRR-4 1661431604
+G8BPQ-4 1669106746
-WA3WLH-14 1661431604
+EI2GYB-4 1669106746
-WA3WLH-11 1661431604
+IZ4FVW-10 1669106746
-W9IKU-11 1661431604
+PE1NNZ-5 1669106746
-N2UEM-11 1661431604
+PI1LAP-4 1669106746
-K5DAT-11 1661431604
+K8OPG-14 1669106746
-N3MEL-3 1661431604
+KB9PVH-11 1669106746
-N0NJY-11 1661431604
+N0NJY-11 1669106746
-KB9PVH-11 1661431604
+N3MEL-3 1669106746
-K8OPG-14 1661431604
+K5DAT-11 1669106746
-PI1LAP-4 1661431604
+N2UEM-11 1669106746
-PE1NNZ-5 1661431604
+W9IKU-11 1669106746
-IZ4FVW-10 1661431604
+WA3WLH-11 1669106746
-EI2GYB-4 1661431604
+WA3WLH-14 1669106746
-G8BPQ-4 1661431604
+PE1RRR-4 1669106746
-W8BAP-6 1661431604
+MS0HFI-4 1669106746
-KF8MZ-6 1661431604
+AE5E-2 1669106746
-N8BHL-6 1661431604
+G0BMH-4 1669106746
-KB8UVN-6 1661431604
+OH5RM-8 1669106746
+GM8BPQ-4 1669106746

Versions.h

@@ -10,8 +10,8 @@
 
 #endif
 
-#define KVers 6,0,23,27
+#define KVers 6,0,23,29
-#define KVerstring "6.0.23.27\0"
+#define KVerstring "6.0.23.29\0"
 
 #ifdef CKernel
 

bpqchat.c

@@ -63,7 +63,7 @@
 //	Restore CMD_TO_APPL flag to Applflags (13)
 //	Check for and remove names set to *RTL 
 //	Add option to run user program when chat user connects (27)
-
+//	Add History (28)
 
 #include "BPQChat.h"
 #include "Dbghelp.h"

bpqchat.h

@@ -400,11 +400,10 @@ typedef struct ChatConnectionInfo_S
 	// and data sucked out under both terminal and system flow control. PACLEN is
 	// enfored when sending to node.
 
-	UCHAR OutputQueue[10000];	// Messages to user
+	UCHAR  * OutputQueue;	    // Messages to user
-	int OutputQueueLength;		// Total Malloc'ed size. Also Put Pointer for next Message
+	int OutputQueueSize;		// Total Malloc'ed size.
+	int OutputQueueLength;		// Put Pointer for next Message
 	int OutputGetPointer;		// Next byte to send. When Getpointer = Queue Length all is sent - free the buffer and start again.
-
-	int CloseAfterFlush;		// Close session when all sent. Set to 100ms intervals to wait.
 	
 	BOOL sysop;					// Set if user is authenticated as a sysop
 	BOOL Secure_Session;		// Set if Local Terminal, or Telnet connect with SYSOP status
@@ -550,6 +549,16 @@ struct ConsoleInfo
 
 };
 
+struct HistoryRec
+{
+	struct HistoryRec * next;
+	time_t Time;
+	char * Topic;
+	char * Message;
+};
+
+extern struct HistoryRec * History;
+extern int HistoryCount;
 
 extern USER *user_hd;
 

chatconfig.cfg

@@ -14,9 +14,9 @@ Chat :
   WrapInput = 0;
   FlashOnConnect = 0;
   CloseWindowOnBye = 0;
-  ConsoleSize = "122,930,359,969";
+  ConsoleSize = "821,1629,283,893";
   MonitorSize = "828,1644,148,770";
   DebugSize = "0,0,0,0";
-  WindowSize = "608,1212,163,511";
+  WindowSize = "714,1318,165,513";
-  Version = "6,0,23,16";
+  Version = "6,0,23,28";
 };