--- APRSCode.c
+++ APRSCode.c
@@ -3674,7 +3674,7 @@
 			if (ptr1)
 				*ptr1 = 0;
 
-//			Debugprintf("Duplicate Message supressed %s", Msg);
+//			Debugprintf("Duplicate Message suppressed %s", Msg);
 			return TRUE;					// Duplicate
 		}
 	}
--- BPQChat.rc
+++ BPQChat.rc
@@ -162,7 +162,7 @@
                     WS_VSCROLL
     DEFPUSHBUTTON   "Save Welcome Message",SAVEWELCOME,140,296,91,14,
                     BS_CENTER | BS_VCENTER
-    LTEXT           " If the node is not directly  connectable (ie is not in your NODES table)  you can add a connect script. This consists of a series of commands seperared by |, eg NOTCHT:G8BPQ-4|C 3 GM8BPQ-9|CHAT",
+    LTEXT           " If the node is not directly  connectable (ie is not in your NODES table)  you can add a connect script. This consists of a series of commands separated by |, eg NOTCHT:G8BPQ-4|C 3 GM8BPQ-9|CHAT",
                     IDC_STATIC,9,52,355,24
 END
 
--- BPQMail.rc
+++ BPQMail.rc
@@ -1045,7 +1045,7 @@
     CONTROL         "Delete Log and Message Files to Recycle Bin",
                     IDC_DELETETORECYCLE,"Button",BS_AUTOCHECKBOX | 
                     BS_LEFTTEXT | BS_MULTILINE | WS_TABSTOP,5,142,115,20
-    CONTROL         "Supress Mailing of Housekeeping Results",
+    CONTROL         "Suppress Mailing of Housekeeping Results",
                     IDC_MAINTNOMAIL,"Button",BS_AUTOCHECKBOX | BS_LEFTTEXT | 
                     BS_MULTILINE | WS_TABSTOP,5,182,115,20
     CONTROL         "Generate Traffic Report",IDC_MAINTTRAFFIC,"Button",
--- HanksRT.c
+++ HanksRT.c
@@ -1186,7 +1186,7 @@
 			// Duplicate, so discard, but save time
 
 			DupInfo[i].DupTime = Now;
-			Logprintf(LOG_CHAT, circuit, '?', "Duplicate Message From %s %s supressed", Call, Msg);
+			Logprintf(LOG_CHAT, circuit, '?', "Duplicate Message From %s %s suppressed", Call, Msg);
 
 			return TRUE;					// Duplicate
 		}
--- RigControl.c
+++ RigControl.c
@@ -8385,7 +8385,7 @@
 
 	switch (Msg[0])
 	{
-	case 'f':			// Get Freqency
+	case 'f':			// Get Frequency
 
 		HLGetFreq(Sock, RIG, sep);
 		return 0;
--- UZ7HODrv.c
+++ UZ7HODrv.c
@@ -374,7 +374,7 @@
 	{
 		// Read Freq
 
-		buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} Modem Freqency %d\r", AGW->CenterFreq);
+		buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} Modem Frequency %d\r", AGW->CenterFreq);
 		return 1;
 	}
 
@@ -382,7 +382,7 @@
 
 	if (AGW->CenterFreq == 0)
 	{
-		buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} Invalid Modem Freqency\r");
+		buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} Invalid Modem Frequency\r");
 		return 1;
 	}
 
--- WinRPRHelper.c
+++ WinRPRHelper.c
@@ -111,7 +111,7 @@
 
 	if (argc < 3)
 	{
-		printf ("Missing paramters - you need COM port and IP Address and rigctl port of BPQ, eg \r\n"
+		printf ("Missing parameters - you need COM port and IP Address and rigctl port of BPQ, eg \r\n"
 			"  WinRPRHelper com10 192.168.1.64:4532\r\n\r\n"
 			"Press any key to exit\r\n");
 
--- config.c
+++ config.c
@@ -649,7 +649,7 @@
 	if (LOCATOR[0] == 0 && LocSpecified == 0 && RFOnly == 0)
 	{
 		Consoleprintf("");
-		Consoleprintf("Please enter a LOCATOR statment in your BPQ32.cfg");
+		Consoleprintf("Please enter a LOCATOR statement in your BPQ32.cfg");
 		Consoleprintf("If you really don't want to be on the Node Map you can enter LOCATOR=NONE");
 		Consoleprintf("");
 
--- kiss.c
+++ kiss.c
@@ -1485,7 +1485,7 @@
 				}	
 			}
 			else
-				Debugprintf("Polled KISS - response from wrong address - Polled %d Reponse %d",  
+				Debugprintf("Polled KISS - response from wrong address - Polled %d Response %d",  
 					KISS->POLLPOINTER->OURCTRL, (Port->RXMSG[0] & 0xf0));
 
 			goto SeeifMore;				// SEE IF ANYTHING ELSE
--- templatedefs.c
+++ templatedefs.c
@@ -1165,7 +1165,7 @@
 		"Send Non-delivery Notifications<br>\r\n"
 		"for P and T messages <input %sname=\"SendND\" value=\"SendND\" type=\"checkbox\" /><br>\r\n"
 		"  <br />\r\n"
-		"Supress Mailing of<br>\r\n"
+		"Suppress Mailing of<br>\r\n"
 		"Housekeeping Result <input %sname=\"NoMail\" value=\"Yes\" type=\"checkbox\"><br><br>\r\n"
 		"Generate Traffic Report<input %sname=\"GenTraffic\" value=\"Yes\" type=\"checkbox\"><br><br>\r\n"
 		"<div style=\"text-align: center;\"><input class='btn'  name=RunNow value=\"Run Housekeeping\" type=submit class='btn'></div>\r\n"
@@ -1454,7 +1454,7 @@
 		"<div style=\"text-align: left; width: 680px; margin: auto;\">The Nodes to link to box defines which other Chat Nodes should be connected to, or from which "
 		"connections may be accepted. The format is ALIAS:CALL, eg BPQCHT:G8BPQ-4. If the node is not directly "
 		"connectable (ie is not in your NODES table) you can add a connect script. This consists of a series of commands "
-		"seperared by |, eg NOTCHT:G8BPQ-4|C 3 GM8BPQ-9|CHAT"
+		"separated by |, eg NOTCHT:G8BPQ-4|C 3 GM8BPQ-9|CHAT"
 
 		"<br><br>The Callsign of the Chat Node is not defined here - it is obtained from the bpq32.cfg APPLICATION line corresponding to the Chat Appl Number.<br>\r\n"
 		"<br></div>\n"
--- WebMail.c
+++ WebMail.c
@@ -2020,7 +2020,7 @@
 			"document.getElementById('myform').action = '/WebMail/QuoteOriginal' + '?%s';"
 			" document.getElementById('myform').submit();}</script>"
 			"<input type=button class='btn' onclick='myfunc()' "
-			"value='Include Orignal Msg'>";
+			"value='Include Original Msg'>";
 		
 		char Temp[1024];
 		char ReplyAddr[128];