Update upstream source from tag 'upstream/2.13'

Update to upstream version '2.13'
with Debian dir 77a91e5c19

CHANGES.3

@@ -435,6 +435,36 @@ screens. I did this after noticing some other node softwares go to the
 extreme in showing stats that most end users would never understand nor 
 even care about. This also saves a lot of bandwidth!
 
+17/01/2020 v2.13
+
+Changed the external command text to inform the end user that the escape
+sequence (CTRL-T typically) is disabled while an external command is run. 
+I've been wanting to do this for a while to preserve integrity for the
+user. This required an edit in cmdparse.c
+
+Edited node.h to reflect this version.
+
+Cleaned up the status command. Prior *any* single character would print the
+long status report. Now either "l" OR "L" will be accepted. If another 
+character is pressed an error will display:
+n1uro-15@n1uro.ampr.org:/uronode6: st s
+Usage: status l OR status L
+
+** IMPORTANT **
+-= IF YOU DO NOT READ THIS YOU WILL APPEAR BROKEN =-
+To be more compliant with downstreams I moved the files in /var/ax25/
+to now be looked for in /var/lib/ax25 which appears to be the new file
+system ruleset by the linux gods. I did NOT make this up. I would *strongly*
+urge you to copy over your current /var/ax25/node/* files after running 
+"make upgrade" unless you wish to start with a fresh system of sorts.
+Your config files in etc/ax25 won't be moved or touched and the man
+pages will remain where they are. Your  help files, perhaps your ROSE
+directory (if you use rose.hlp like I do), and user logs will be reset.
+Users will be all considered new again so to prevent this from occurring
+I would move those files over.
+
+73 - Enjoy.
+
 ----------- Note on SystemD --------
 In uronode.socket, you'll notice the line:
 ListenStream=0.0.0.0:3694

Makefile.in

@@ -68,7 +68,7 @@ installman:
 	install -m 644	  -p man/axdigi.8	 $(MAN_DIR)/man8
 	install -m 644	  -p man/flexd.8	 $(MAN_DIR)/man8
 
-upgrade: installman installhelp
+upgrade: installbin installman installhelp
 	install -b -m 600    -p etc/uronode.announce  $(ETC_DIR)
 	install -m 755 -p uronode       $(SBIN_DIR)
 	install -m 755 -p nodeusers     $(SBIN_DIR)

cmdparse.c

@@ -244,9 +244,9 @@ int cmdparse(struct cmd *list, char *cmdline)
       axio_printf(NodeIo, "%s} ", NodeId);
     }
     if (check_perms(PERM_ANSI, 0L) != -1) {
-      axio_printf(NodeIo,"\e[01;32mExecuting command...\e[0m\n");
+      axio_printf(NodeIo,"\e[01;32mExecuting command. Escape is disabled until command is done.\e[0m\n");
     } else {
-      axio_puts("Executing command... \n", NodeIo);
+      axio_puts("Executing command. Escape is disabled until command is done. \n", NodeIo);
     }
     return extcmd(cmdp, argv);
   }

command.c

@@ -801,7 +801,7 @@ int do_status(int argc, char **argv)
   if (check_perms(PERM_ANSI, 0L) != -1) {
     axio_printf(NodeIo, "\e[01;37m");
   }
-  node_msg("Status report:");
+  node_msg("Short Status report:");
   if (check_perms(PERM_ANSI, 0L) != -1) {
     axio_printf(NodeIo, "\e[0;m");
   }
@@ -829,7 +829,7 @@ int do_status(int argc, char **argv)
   return 0;  
 }
 /* "Status L" */
-  if (argc == 2) {
+  if ((*argv[1] == 'L') || (*argv[1] == 'l')) {
   if (User.ul_type == AF_NETROM) {
     axio_printf(NodeIo,"%s} ", NodeId);
   }
@@ -939,10 +939,19 @@ int do_status(int argc, char **argv)
   axio_printf(NodeIo,"NET/ROM:           %-10d %-10d %-10d",nn,n,r);
 #endif
 #endif
+}
+  else { 
+	if (User.ul_type == AF_NETROM) {
+    	axio_printf(NodeIo, "%s} ", NodeId);
+    	}
+	if (check_perms(PERM_ANSI, 0L) != -1) {
+	axio_printf(NodeIo, "\e[01;37m");
+  	}
+	axio_printf(NodeIo, "Usage: status l OR status L");
+	}
   if (User.ul_type == AF_NETROM) {
     node_msg("");
     }
-  }
   return 0;
 } 
 

configure

@@ -26,7 +26,7 @@ make distclean > make.debug
 [ "$LIB_DIR" ] || LIB_DIR=/usr/local/lib
 [ "$DATA_DIR" ] || DATA_DIR=/usr/local/share
 [ "$MAN_DIR" ] || MAN_DIR=/usr/local/share/man
-[ "$VAR_DIR" ] || VAR_DIR=/usr/local/var/ax25
+[ "$VAR_DIR" ] || VAR_DIR=/usr/local/var/lib/ax25
 
 echo "Welcome to the configuration utility for URONode. This configure script"
 echo "will very simply and easily guide you into installling URONode with as"
@@ -62,7 +62,7 @@ if [ -e "$MAKE" ]
    then
    echo -n "saw $MAKE... "
    _sleep 1
-   echo "MAKE found! Congratulations!!"
+   echo "MAKE found!"
 else
    echo "make not found!"
    echo " "

jnos20k.diff

@@ -1,130 +0,0 @@
-Common subdirectories: jnos/backup and jnos2/backup
-Common subdirectories: jnos/installerv2.1 and jnos2/installerv2.1
-Common subdirectories: jnos/j2pwmgr and jnos2/j2pwmgr
-Common subdirectories: jnos/k6fsh and jnos2/k6fsh
-diff -u jnos/mailbox.c jnos2/mailbox.c
---- jnos/mailbox.c	2016-07-03 10:04:21.000000000 -0400
-+++ jnos2/mailbox.c	2016-09-13 22:45:14.293150509 -0400
-@@ -1646,7 +1646,7 @@
-   
-     /* Now say goodbye */
-     if(!(m->privs & IS_EXPERT))
--        tprintf("\nThank you %s, for calling %s JNOS.\n",
-+        tprintf("%s, thank you for calling %s. Come back soon.\nRemember to keep packet alive!\n",
- #ifdef USERLOG
-         m->username ? m->username : m->name,
- #else
-diff -u jnos/makefile jnos2/makefile
---- jnos/makefile	2015-12-08 12:37:21.000000000 -0500
-+++ jnos2/makefile	2016-09-14 18:18:30.268383703 -0400
-@@ -198,7 +198,8 @@
- 	echo "YOU MUST EDIT scanjmsg.c TO SPECIFY WHERE scanjmsg.dat IS LOCATED"
- 
- clean:
--	$(RM) *.[oa]
-+#	Oops, forgot to remove possible existing binaries too! - N1URO
-+	$(RM) *.[oa] jnos jnospwmgr jnosinstaller j2pwmgr/j2pwrtns.o
- 
- clients.a: $(CLIENTS)
- 	$(RM) clients.a
-diff -u jnos/mboxcmd.c jnos2/mboxcmd.c
---- jnos/mboxcmd.c	2016-07-03 10:04:26.000000000 -0400
-+++ jnos2/mboxcmd.c	2016-09-13 22:45:14.293150509 -0400
-@@ -478,7 +478,7 @@
- #ifdef NETROM
-     if(Nr_iface != NULLIF) { /* Use netrom call, and alias (if exists) */
-         if(*Myalias != '\0')
--            sprintf(Mbnrid,"%s:%s ",pax25(tmp,Myalias),
-+            sprintf(Mbnrid,"%s:%s} ",pax25(tmp,Myalias),
-             pax25(tmp2,Nr_iface->hwaddr));
-         else
-             sprintf(Mbnrid,"%s ",pax25(tmp,Nr_iface->hwaddr));
-@@ -486,7 +486,7 @@
-     }
-     /* Use Mycall, and alias (if exists) */
-     if(*Myalias != '\0')
--        sprintf(Mbnrid,"%s:%s ",pax25(tmp,Myalias),pax25(tmp2,Mycall));
-+        sprintf(Mbnrid,"%s:%s} ",pax25(tmp,Myalias),pax25(tmp2,Mycall));
-     else
- #endif
- #ifdef AX25
-diff -u jnos/misc.c jnos2/misc.c
---- jnos/misc.c	2007-04-12 14:08:19.000000000 -0400
-+++ jnos2/misc.c	2016-09-13 22:45:14.293150509 -0400
-@@ -14,6 +14,8 @@
-         n = strlen(s);
-         if(!strncmp(s,"convers",n))
-             p = IPPORT_CONVERS;
-+	else if(!strncmp(s,"node",n))
-+	    p = IPPORT_NODE;		/* URONode port - N1URO */
-         else if(!strncmp(s,"telnet",n))
-             p = IPPORT_TELNET;
-         else if(!strncmp(s,"ttylink",n))
-diff -u jnos/netuser.c jnos2/netuser.c
---- jnos/netuser.c	2007-04-12 14:08:19.000000000 -0400
-+++ jnos2/netuser.c	2016-09-13 22:45:14.293150509 -0400
-@@ -164,9 +164,12 @@
-         case 1234:              /* Pulled out of the air */
-             sprintf(port,"remote");
-             break;
--        case 3600:
-+        case 3600:		/* Convers server port */
-             sprintf(port,"convers");
-             break;
-+	case 3694:		/* URONode inbound tcp port - N1URO*/
-+	    sprintf(port,"node");
-+	    break;
-         default:
-             sprintf(port,"%u",s->port);
-             break;
-diff -u jnos/nrcmd.c jnos2/nrcmd.c
---- jnos/nrcmd.c	2012-03-20 12:30:29.000000000 -0400
-+++ jnos2/nrcmd.c	2016-09-13 22:45:14.293150509 -0400
-@@ -498,7 +498,7 @@
-                      * ALSO change the size of the STRSIZE define above !!!
-                      */
-                     sprintf(&temp[k],"%-16s %s %3d %3d %-8s %-9s %c %-5u",buf,
--                    rp->flags & G8BPQ_NODEMASK ? "(BPQ)" : "     ",
-+                    rp->flags & G8BPQ_NODEMASK ? "     " : "     ",
-                     bp->quality,bp->obsocnt,
-                     np->iface->name,
-                     pax25(neighbor,np->call),
-@@ -631,7 +631,7 @@
- #endif
-             ,buf,pax25(destbuf,rp->call)
- #ifdef G8BPQ
--            ,rp->flags & G8BPQ_NODEMASK ? "(BPQ)" : "     "
-+            ,rp->flags & G8BPQ_NODEMASK ? "     " : "     "
- #endif
-             );
-         } else
-@@ -648,7 +648,7 @@
- #endif
- #ifdef G8BPQ
- 		if (npp && (npp->flags & G8BPQ_NODEMASK))
--			tprintf ("(BPQ)");
-+			tprintf ("     ");
- 		else
- #endif
- 
-@@ -793,7 +793,7 @@
- #endif
- #ifdef G8BPQ
- 			if (rp && (rp->flags & G8BPQ_NODEMASK))
--				tprintf ("(BPQ)");
-+				tprintf ("     ");
- 			else
- #endif
- 
-Common subdirectories: jnos/old_inp_code and jnos2/old_inp_code
-diff -u jnos/socket.h jnos2/socket.h
---- jnos/socket.h	2016-06-26 13:27:07.000000000 -0400
-+++ jnos2/socket.h	2016-09-14 10:20:04.532733148 -0400
-@@ -56,6 +56,7 @@
- #define IPPORT_RSYSOP 1513      /* Remote sysop login (totally arbitrary #) */
- #define IPPORT_CONVERS 3600     /* Converse */
- #define IPPORT_XCONVERS 3601    /* LZW Convers */
-+#define IPPORT_NODE 3694	/* URONode telnet port - N1URO*/
- #define IPPORT_CALLDB 1235      /* Pulled out of the air GRACILIS */
- #define IPPORT_TRACE 1236       /* Pulled out of the air - WG7J */
- #define IPPORT_TERM 5000        /* Serial interface server port */

man/flexd.conf.5

@@ -37,6 +37,10 @@ PollInterval <time/mins>. Be sure you do NOT configure it to connect to
 a service linked within the flexnet neighbor such as a BBS! You will NOT
 receive any destinations to your system that way and the BBS will think
 you're attempting a feed.
+
+Also note: your FlexNet destination host *must* reside in your uronode.route
+file or else flexd will *not* know the path where to connect and the robot
+will exit.
 .TP 14
 
 
@@ -44,6 +48,7 @@ you're attempting a feed.
 .SH FILES
 .LP
 /usr/local/etc/ax25/flexd.conf
+/usr/local/etc/ax25/uronode.routes
 .SH "SEE ALSO"
 .BR uronode (8),
 .BR uronode.perms (5),

node.h

@@ -1,5 +1,5 @@
-#define VERSION                "URONode v2.12"
-#define COMPILING	       "30 June, 2020"
+#define VERSION                "URONode v2.13"
+#define COMPILING	       "17 January, 2021"
 
 #define STATE_IDLE	0
 #define STATE_TRYING	1

system.c

@@ -73,8 +73,9 @@ int cusgets(char *buf, int buflen, ax25io *iop)
 }
 
 /*---------------------------------------------------------------------------*/
+#define _XOPEN_SOURCE
 
-int find_pty(char *ptyname)
+int find_pty(char **ptyname)
 {
   char master[80];
   int fd;
@@ -83,10 +84,11 @@ int find_pty(char *ptyname)
 
   for(num = lastnum + 1; ; num++) {
     if (num >= NUMPTY) num = 0;
-    sprintf(master, "/dev/pty%c%x", 'p' + (num >> 4), num & 0xf); 
+//    sprintf(master, "/dev/ptmx%c%x", 'p' + (num >> 4), num & 0xf); 
+	sprintf(master, "/dev/ptmx", O_RDWR);
 /*      sprintf(master, "/dev/pts/%x", num & 0xf); */
     if ((fd = open(master, O_RDWR | O_NONBLOCK, 0600)) >= 0) {
-      sprintf(ptyname, "/dev/tty%c%x", 'p' + (num >> 4), num & 0xf);
+      sprintf(ptyname, "/dev/ptmx", 'p' + (num >> 4), num & 0xf);
 /*     sprintf(ptyname, "/dev/pts/%x", num & 0xf); */
       lastnum = num;
       return fd;
@@ -496,7 +498,7 @@ void lastlog(void)
     break;
 #endif    
   case AF_INET:   strcpy(hostname, User.call);
-	strcat(hostname, " on IPv4 ");
+	strcat(hostname, " from ip ");
 	strcat(hostname, User.ul_name);
     break;
   case AF_INET6:  strcpy(hostname6, User.ul_name);