diff --git a/debian/README.source b/debian/README.source
new file mode 100644
index 0000000..1a89a3d
--- /dev/null
+++ b/debian/README.source
@@ -0,0 +1,2 @@
+Manpages from upstream have been patched out due to being supplied as
+gzipped files. They have been unzipped and moved to debian/manpages.
diff --git a/debian/manpages/axdigi.8 b/debian/manpages/axdigi.8
new file mode 100644
index 0000000..f764c6e
--- /dev/null
+++ b/debian/manpages/axdigi.8
@@ -0,0 +1,52 @@
+.TH AXDIGI 8 "28 April 2013" Linux "Linux Programmer's Manual"
+.SH NAME
+axdigi \- axdigi file.
+.SH DESCRIPTION
+.LP
+.B axdigi
+This executable should be loaded in your startup script with the command:
+/usr/local/sbin/axdigi (or path to where you installed it). This file enables
+cross-port digipeating within your linux's ax25 stack.
+.LP
+Special Conditions:
+.B axdigi
+In order to digipeat, you or the user *must* know your SSID associated
+with the ifconfig <interface> that is the direct link to the outbound
+path they wish to digi to. axdigi will handle the appropriate digipeat
+accordingly. If you have multiple ax25 interfaces, you should somehow
+list them for the users in the axports description so they will see
+them when doing an "Interface" command while on URONode. If the user
+wishes to log off URONode and digi through, then they must use the
+interface's SSID associated with the OUTBOUND path to their destination.
+.sp
+commands are:
+.TP 14
+.B C <destination> via <your interface-SSID>
+If the user heard station A1BCD-7 on your ax0 interface, and that
+interface's SSID is: W1XYZ-9 (NOT the FlexID of URONode!) then the user
+would enter:
+c a1bcd-7 via w1xyz-9 
+even if their inbound interface might be ax1 and it's ifconfig shows 
+your SSID as w1xyz-10!
+.TP 14
+.B Detailed information
+If you have 3 ax25 interfaces ifconfigured as:
+ax0 - w1xyz-9
+ax1 - w1xyz-10
+ax2 - w1xyz-11
+
+User k2lmn would enter your node via ax2 and they wish to digi to
+a1bcd-7 which is heard on ax0 they would simply enter:
+c a1bcd-7 via w1xyz-9 to connect. Axdigi handles the crossport
+functions. If they tried:
+c a1bcd-7 via w1xyz-11
+the connect would fail because it would attempt to digi OUT on your
+ax2 interface. This may get tricky so expect a need to educate your
+users on this. Unfortunately, linux lacks native cross-port digipeating
+at this time so this is a work-around.
+.SH FILES
+.LP
+/usr/local/sbin/axdigi
+.SH "SEE ALSO"
+.BR axports (5),
+.BR ax25 (4).
diff --git a/debian/manpages/flexd.conf.5 b/debian/manpages/flexd.conf.5
new file mode 100644
index 0000000..60c50cb
--- /dev/null
+++ b/debian/manpages/flexd.conf.5
@@ -0,0 +1,51 @@
+.TH FLEXD.CONF 5 "28 April 2013" Linux "Linux Programmer's Manual"
+.SH NAME
+flexd.conf \- flexd configuration file.
+.SH DESCRIPTION
+.LP
+.B flexd.conf
+file is read by flexd at program startup and is used to modify the
+behaviour of the robot.
+.LP
+The lines within
+.B flexd.conf
+must either be a comment line, which starts with a # in the first column, or
+one of the commands listed below. Commands and arguments are delimited
+by white space. Arguments can contain white space if they are enclosed
+in double quotes. Also C-style escapes (\\n, \\x0A, \\012 etc.) are parsed
+within double quotes.
+.sp
+Available configuration commands are:
+.TP 14
+.B MyCall	<xx#xx>
+Sets up the callsign AND ssid you wish to use to connect to your flexnet
+neighbor for destinations import. Do NOT use an ssid of your ax25 interface
+which you'll be polling from as you may create a loop between your system
+and the flexnet neighbor.
+An example: MyCall	kb1uuu-13
+.TP 14
+.B PollInterval	<time/secs>
+This string tells the robot how many times in SECONDS to poll your flexnet
+neighbor and import their destination table. In my production environment
+300 (or 5 minutes) seemed to be fine. I would NOT go below 180 (3 minutes)
+as you may create more traffic than needed.
+.TP 14
+.B FlexGate	<xx#xx-##>
+This is the callsign of your flexnet neighbor. The robot will read this 
+callsign-ssid and attempt a connect to it every ## minutes assigned in
+PollInterval <time/mins>. Be sure you do NOT configure it to connect to
+a service linked within the flexnet neighbor such as a BBS! You will NOT
+receive any destinations to your system that way and the BBS will think
+you're attempting a feed.
+.TP 14
+
+
+
+.SH FILES
+.LP
+/usr/local/etc/ax25/flexd.conf
+.SH "SEE ALSO"
+.BR uronode (8),
+.BR uronode.perms (5),
+.BR axports (5),
+.BR ax25 (4).
diff --git a/debian/manpages/nodeusers.1 b/debian/manpages/nodeusers.1
new file mode 100644
index 0000000..36456cd
--- /dev/null
+++ b/debian/manpages/nodeusers.1
@@ -0,0 +1,36 @@
+.TH NODEUSERS 1 "28 April 1998" Linux "Linux Programmer's Manual"
+.SH NAME
+nodeusers \- URONode user information lookup program
+.SH SYNOPSIS
+.B nodeusers [-a] [-i] [-l]
+.SH DESCRIPTION
+.LP
+.B Nodeusers 
+displays information about current URONode users.
+.SH OPTIONS
+.TP 10
+.BI \-a
+Tells nodeusers to use a plain <CR> as end-of-line. This is useful
+if nodeusers is called from ax25d.
+.TP 10
+.BI \-i
+Tells nodeusers to use a <CR><LF> pair as end-of-line sequence and also
+to wait for one line of input before sending the user data. This
+should be used if nodeusers is used in an internet environment (eg. as
+a fingerd replacement).
+.TP 10
+.BI \-l
+Enables logging of errors to the system logging facility.
+.SH FILES
+.LP
+.TP 5
+.B /var/ax25/node/loggedin
+Database of current users.
+.SH "SEE ALSO"
+.BR uronode (8)
+.SH AUTHOR
+Brian Rogers N1URO <n1uro@n1uro.com>
+.br
+Stefano Noferi IZ5AWZ <iz5awz@radio-ge.cnuce.cnr.it>
+.br
+Tomi Manninen OH2BNS <tpmannin@cc.hut.fi>
diff --git a/debian/manpages/uronode.8 b/debian/manpages/uronode.8
new file mode 100644
index 0000000..829ce3b
--- /dev/null
+++ b/debian/manpages/uronode.8
@@ -0,0 +1,245 @@
+.TH URONODE 8 "28 April 1998" Linux "Linux System Managers Manual"
+.SH NAME
+URONode \- Node front end for AX.25, NET/ROM, Rose and TCP
+.SH SYNOPSIS
+.B node
+.SH DESCRIPTION
+.LP
+.B URONode
+is a simple node front end, modelled after the node shells of LinuxNode,
+AWZNode, and Flexnode.
+.SH COMMANDS
+The following commands are supported for users of
+.B URONode:
+.TP 14
+.BI ?
+Give short list of available commands.
+.TP 14
+.BI Bye
+Disconnect user from the node.
+.TP 14
+.BI "Connect <call | alias> [s|d]                  For NETROM"
+.TP 14
+.BI "Connect <port> <call> [via <call1> ...] [d|s] For AX.25"
+.TP 14
+.BI "Connect <call> <address> [<digi>] [d|s]       For ROSE"
+.TP 14
+.BI "Connect <destination> [s|d]                   For FlexNet"
+.sp 1
+Initiates an AX25, NET/ROM, ROSE or Flexnet connection to a remote host. 
+If more than two parameters are entered and the second parameter is ten 
+charachers in length then it is interpreted as a ROSE connection, 
+otherwise the first parameter is interpreted as a port name and AX25 is 
+used to make the connection via that port. If only one parameter is given 
+the connection is made searching for the callsign in NET/ROM nodes, 
+in AX25 Fixed links, in FlexNet destinations and last in Mheard database 
+in this order.	
+.sp
+For a ROSE connection the <address> part must be exactly six or ten digits.
+If only six digits are supplied, the DNIC (first four digits) default to the
+local DNIC. The local DNIC is assumed to be that of the first configured
+Rose port in /etc/ax25/rsports.
+.sp
+The user may optionally supply as the last argument a single character
+which modifies the default behaviour on disconnection of the connection.
+If a single `s' is entered as the last argument, then when the remote host
+disconnects you will be returned to this node. If a single `d' is entered as
+the last argument, you will be disconnected from this node too. The Default
+behaviour (neither `s' nor `d' entered) is configured in the node configuration
+file and depends on the sysop preference.
+.TP 14
+.BI "CAllbook <call>[@<server>]"
+Retrieve data about a callsign from an internet-accessible
+callbook server. The server name can usually be omitted, since
+the default server configured by the operator is usually
+valid. The default setting can be overridden by specifying
+a host name.
+.TP 14
+.BI "Escape [<escape string>]"
+Override the sysop configured default escape character setting. If the Escape
+command is given without an argument then the current escape character setting
+is returned to the user. The escape string may be specified using any of the
+well known codings:
+.IP
+.BI "<char>"
+to enter the escape character in its binary form.
+.IP
+.BI "^C"
+to enter the escape character as a control character value.
+.IP
+.BI "NNN"
+to set the escape character to a Decimal value.
+.IP
+.BI "0xNN"
+to set the escape character to a HexaDecimal value.
+.IP
+.BI "0NNN"
+to set the escape character to an Octal value.
+.IP
+.BI "off"
+to disable the escape character.
+.TP 14
+.BI "Finger [<username>][@<hostname>]"
+Retrieve information about users of a system. If the user
+name is omitted, shows the users currently logged on the
+host. If the hostname is omitted, defaults to the local host.
+.TP 14
+.BI "Help [<command>]"
+Give help for the specified command or this text if no
+command is specified. Commands can not be abbreviated.
+Use the "?" command to retrieve a list of available commands.
+.TP 14
+.BI "HOst <hostname> | <ip address>"
+Give the Domain Name Service host name information about <hostname> or
+<ip address>.
+.TP 14
+.BI Info
+Display the version information and the contents of the
+/usr/local/etc/ax25/uronode.info file, which should describe any aspects
+of your system that you would like to brag about.
+.TP 14
+.BI INTerfaces
+Display the node's interface schema, most folks often call these "ports".
+.TP 14
+.BI "Links [d | n | v | <call>]"
+Shows the AX25 link table of the local node. The destinations 
+on this list can be reached using the Connect command without 
+knowing the actual network path used (assuming the network is OK).
+
+The optional parameter d show the AX25 nodes directly linked.
+The optional parameter n show the AX25 nodes linked connecting 
+another node and passing a string like "C XX0XX".
+The optional parameter v show the AX25 links via digipeaters.
+
+You can also specify a destination callsign to get the verbose 
+information for a single destination.
+.TP 14
+.BI "Mheard [<portname>]"
+Give a list of heard AX.25 stations on the specified port.
+.TP 14
+.BI "Nodes [* | <node>]"
+Show the NET/ROM node table of the local host. The nodes on this
+list can be reached using the Connect command without knowing the
+actual network path used (assuming the network is OK).
+.sp
+The optional argument '*' toggles verbose mode, showing the
+Obsolescence counter, relative path quality and the port and
+neighbour node used to reach each node. You can also specify
+a node callsign to get the verbose information for a single node.
+In that case a "which" field that tells what route the kernel
+will use to reach the node is also shown.
+.TP 14
+.BI "Ping <host> [<size>]"
+Check if a host can be reached trough the network by sending
+an ICMP Echo Request packet to the host and waiting for it to
+reply. If a reply is received the round-trip-time (RTT)
+between the local and remote hosts is shown.
+.sp
+If an optional length is specified the data portion of the
+packet is filled with length number of bytes.
+.TP 14
+.BI Routes
+Shows the NET/ROM route table of the local host (eg. the nodes
+which the local node directly talks with). These nodes are used
+to reach the other nodes on the node table. Fields shown are:
+.IP
+.BI "Link"
+Is there an AX25 connection active to this node.
+.IP
+.BI "Port"
+Which port is this route on.
+.IP
+.BI "Callsign"
+The callsign of the neighbour node.
+.IP
+.BI "Quality"
+A relative quality for the path (0-255).
+.IP
+.BI "Destinations"
+Number of other nodes reached via this route.
+.IP
+.BI "Lock"
+Is the quality of this route locked by the operator.
+.IP
+.BI "QSO"
+Number of NET/ROM session enties.
+.TP 14
+.BI "Telnet <host> [<port>] [<string>] [d|s]"
+Initiate a telnet session to a remote host using TCP/IP.
+By default, the telnet command connects to the TCP port 23
+(allocated for telnet). You can specify another TCP port or
+a TCP port name.
+.sp
+If an optional third argument <string> is given, that string, followed
+by a CRLF is sent to the remote host right after the connection is
+established. This is mainly useful for command aliases.
+.sp
+If a single `s' is entered as the last parameter, then when
+the remote host disconnects you will be returned to this node.
+If a single `d' is entered as the last parameter, you will
+be disconnected from this node too. Default behaviour (neither
+`s' nor `d' entered) depends on sysop configuration.
+.TP 14
+.BI "MSG <user> <message>"
+Send a message to another user of the node. The user
+in question must be in idle state (ie. not connected/connecting
+anywhere or running a program).
+.sp
+If the user has an SSID other than zero, the SSID must be
+specified. If multiple users are logged in with the same
+callsign/SSID pair, those who are in idle state, get the message.
+.TP 14
+.BI Users
+Show a list of users currently connected to the local node,
+where the users are coming from, and what are they doing at the
+moment.
+.SH FILES
+.LP
+.TP 5 
+.B /usr/local/etc/ax25/uronode.conf
+URONode configuration file.
+.br
+.TP 5
+.B /usr/local/etc/ax25/uronode.perms
+URONode permissions file.
+.br
+.TP 5
+.B /usr/local/etc/ax25/uronode.users
+URONode users settings file.
+.br
+.TP 5
+.B /usr/local/etc/ax25/uronode.motd
+URONode message of the day file.
+.br
+.TP 5 
+.B /usr/local/etc/ax25/uronode.info
+The response to the 'info' command.  
+This file should be edited to reflect the local configuration.
+.br
+.TP 5 
+.B /usr/local/var/ax25/node/loggedin
+Database of current users.
+.br
+.TP 5
+.B /usr/local/var/ax25/mheard/mheard.dat
+Information about AX.25 stations heard.
+.br
+.TP 5 
+.B /usr/local//ax25/node/help/*.hlp
+The online help files.
+.SH "SEE ALSO"
+.BR uronode.conf (5),
+.BR uronode.perms (5),
+.BR axports (5),
+.BR ax25d (8),
+.BR mheardd (8).
+.SH AUTHOR
+Brian Rogers N1URO <n1uro@n1uro.com>
+.SH THANKS TO
+Stefano Noferi IZ5AWZ <iz5awz@radio-gw.cnuce.cnr.it>
+.br
+Tomi Manninen OH2BNS <tpmannin@cc.hut.fi>
+.br 
+Alan Cox GW4PTS <gw4pts@gw4pts.ampr.org>
+.br 
+Roy PE1RJA <roy@esrac.ele.tue.nl>
diff --git a/debian/manpages/uronode.conf.5 b/debian/manpages/uronode.conf.5
new file mode 100644
index 0000000..7e8571f
--- /dev/null
+++ b/debian/manpages/uronode.conf.5
@@ -0,0 +1,252 @@
+.TH URONODE.CONF 5 "28 April 1998" Linux "Linux Programmer's Manual"
+.SH NAME
+uronode.conf \- URONode configuration file.
+.SH DESCRIPTION
+.LP
+.B uronode.conf
+file is read by URONode at program startup and is used to modify the
+behaviour of the node. The URONode node.conf is no compatible with
+the LinuxNode file, as it add new entries: FlexId Prompt and PassPromt.
+.LP
+The lines within
+.B uronode.conf
+must either be a comment line, which starts with a # in the first column, or
+one of the commands listed below. Commands and arguments are delimited
+by white space. Arguments can contain white space if they are enclosed
+in double quotes. Also C-style escapes (\\n, \\x0A, \\012 etc.) are parsed
+within double quotes. Tabs may also be used for delimiting columns.
+.sp
+Available configuration commands are:
+.TP 14
+.B Alias <NAme> \(lq<command> [<args...>]\(rq
+Sets up a command alias. The number of uppercase characters at the
+beginning of <NAme> specifies how much the user may abbreviate the
+command. The uppercase part should be long enough to separate the command
+from other commands starting with the same letters. If there are no
+uppercase letters in the beginning, the whole name is converted to upper
+case and user can not abbreviate the command.
+The command and arguments are subject to
+.B parameter expansion
+(see below).
+.TP 14
+.B ConnTimeout <timeout>
+When user is connected to another system via this system and the
+connection is idle (no data flowing in either direction) for <timeout>
+seconds the connection is dropped and user disconnected from node.
+Default is 3600 seconds
+(1 hour).
+.TP 14
+.B Email	<your@node.ampr.org>
+This is your amprnet or commercial email address that's displayed
+to users on interfaces you require having a password on to access
+your node, highly suggested on inet interfaces. You may leave
+off the <>'s. If you do not have an Email line in node.conf
+then your email address to users will display as (null) and
+will make you look sloppy :-)
+.TP 14
+.B EscapeChar <escape>
+Specifies the escape character. <escape> should be the decimal 
+representation of the ASCII code of the wanted escape character.
+Setting escape character to \-1 disables the feature altogether.
+The default is 20 (ctrl-t).
+.sp
+Note that the escape mechanism breaks 8-bit transparency of URONode
+and you should either disable it or set the no-escape flag in node.perms
+for the forwarding stations if (compressed) forward is run trough
+URONode.
+.TP 14
+.B ExtCmd <NAme> <flags> <uid> <exec> <args...>
+.RS
+.TP 10
+.B NAme
+This is the name under which the command appears at nodes command list.
+The number of uppercase characters at the beginning of <NAme> specifies
+how much the user may abbreviate the command.
+The uppercase part should be long enough to separate the command
+from other commands starting with the same letters. If there are no
+uppercase letters in the beginning, the whole name is converted to upper
+case and user can not abbreviate the command.
+.TP 10
+.B flags
+This is a sum of flags that control the way the external
+command is executed. Currently two flags are implemented:
+.RS
+.TP 5
+.B 1
+Run command through pipe. Without this flag node just fork()s and exec()s
+the specified command and then waits for it to terminate. The command must
+it self be aware about the underlying protocol. It must handle packetising
+and any end of line conversions. With this flag however node sets up a pipe
+between it self and the command and handles packetising and end of line
+conversions for it.
+.TP 5
+.B 2
+Reconnected to flag. If this flag is set, the user gets a reconnected to
+prompt after the external command is finished.
+.RE
+.TP 10
+.B uid
+This is the userid that the following command should run under when
+executing.
+.TP 10
+.B exec
+This is the executable that should be executed.
+.TP 10
+.B args...
+These are the optional arguments that are passed to the executable.
+The arguments are subject to
+.SM
+.B "parameter expansion"
+(see below).
+.RE
+.TP 14
+.B HiddenPorts <portname> ...
+Marks <portname> as hidden. Hidden ports are not shown to users in
+Links, Mheard, Ports and Routes commands and can not be used to make
+AX.25 downlink connections unless user is specially permitted to do
+so (see node.perms(5)). Up to 32 hidden ports can be specified with
+this command.
+.TP 14
+.B HostName <hostname>
+This is the visible hostname of the node. It will be shown at telnet
+login and in the node welcome message.
+.TP 14
+.B IdleTimeout <timeout>
+After <timeout> seconds of inactivity while waiting for a command user
+is disconnected from node. Default is 900 seconds (15 mins).
+.TP 14
+.B LocalNet <network>
+Defines a "local" network. Users telneting from hosts in this network
+are treated separately (see node.perms(5)). <network> is a KA9Q NOS
+style network address consisting of a dotted quad ip address of the
+network and a number of significant bits separated by a slash. Note
+that 127.0.0.0/8 (loopback net) is also considered "local" by default.
+.TP 14
+.B LogLevel <loglevel>
+Specifies what node should log. The available levels are:
+.RS
+.TP 5
+.B 0
+Don't log anything.
+.TP 5
+.B 1
+Log only critical errors.
+.TP 5
+.B 2
+Log errors and logins/logouts.
+.TP 5
+.B 3
+Log errors, logins/logouts and all gateway commands.
+.LP
+Default is to log only critical errors.
+.RE
+.TP 14
+.B NodeId <nodeid>
+This is the node id that is shown in every message from node. Default
+is "URONode".
+.TP 14
+.B FlexID <flexid>
+This is typically your ax25 callsign-ssid that links to flexnet and/or
+to your user interface set by the sysop in ax25d.conf.
+.TP 14
+.B RoseID <rosecall@dnic,######>
+This is your node's rosecall-ssid and your full dnic number typically
+consisting of your country code, area code, and phone extension. An
+example is: 3100,860906. The full string would be for this part of
+the conf file using my config: RoseID n1uro-8@3100860906 or if you do not
+use rose enter: RoseID none
+.TP 14
+.B NrPort <portname>
+This is the name of the netrom port that is used when making outgoing
+netrom connects. Normally it should match the portname that is used
+in ax25d.conf to listen for incoming netrom calls. Default is the first
+netrom port.
+.TP 14
+.B ReConnect on|off
+ReConnect flag. If this is on, users gatewaying to another host
+get reconnected to this node after the remote host closes connection.
+If it's off connection to the user will also be closed. User can
+override the default behaviour with a single `s' or `d' at the end
+of the gatewaying command (connect or telnet). Default is off.
+.TP 14
+.B Prompt <NodePrompt>
+This is the prompt string of the node. It's delimited by double quotes.
+You can use also a "\\n" character for a multi-lines prompt.
+.TP 14
+.B PassPrompt <PasswordPrompt>
+This is the prompt string for sysop password request.  It's delimited by 
+double quotes. You can use also a "\\n" character for a multi-lines prompt.
+.SH PARAMETER EXPANSION
+.LP
+The arguments passed to the real command by the Alias and ExtCmd
+commands are subject to parameter expansion. If a word starts with a %,
+it is expanded. The following formats are expanded:
+.TP 14
+.B %parameter
+This is substituted with the value of
+.B parameter
+.
+.TP 14
+.B %{parameter}
+The same as above.
+.TP 14
+.B %{parameter:default}
+If
+.B parameter
+is defined this is susbtituted with the value of it. If not, the default
+value is substituted. This currently applies only to positional parameters
+0...9.
+.LP
+The following parameters are defined:
+.LP
+.TP 8
+.B 0...9
+The positional parameters.
+.TP 8
+.B U
+The username (callsign) of the remote station in upper case without the SSID.
+.TP 8
+.B u
+The username (callsign) of the remote station in lower case without the SSID.
+.TP 8
+.B S
+The username (callsign) of the remote station in upper case with the SSID.
+.TP 8
+.B s
+The username (callsign) of the remote station in lower case with the SSID.
+.TP 8
+.B P
+The nodename (callsign) of the remote station (NET/ROM), the portname the
+user is coming in via (AX.25) or the ip address of the remote host (TCP).
+In upper case without the SSID.
+.TP 8
+.B p
+The nodename (callsign) of the remote station (NET/ROM), the portname the
+user is coming in via (AX.25) or the ip address of the remote host (TCP).
+In lower case without the SSID.
+.TP 8
+.B R
+The nodename (callsign) of the remote station (NET/ROM), the portname the
+user is coming in via (AX.25) or the ip address of the remote host (TCP).
+In upper case with the SSID.
+.TP 8
+.B r
+The nodename (callsign) of the remote station (NET/ROM), the portname the
+user is coming in via (AX.25) or the ip address of the remote host (TCP).
+In lower case with the SSID.
+.TP 8
+.B t
+The type of the user connection (ax25, netrom, rose, inet, host) in lower case.
+.TP 8
+.B T
+The type of the user connection (ax25, netrom, rose, inet, host) in upper case.
+.LP
+Anything else after a % is substituted with a %.
+.SH FILES
+.LP
+/usr/local/etc/ax25/uronode.conf
+.SH "SEE ALSO"
+.BR uronode (8),
+.BR uronode.perms (5),
+.BR axports (5),
+.BR ax25 (4).
diff --git a/debian/manpages/uronode.perms.5 b/debian/manpages/uronode.perms.5
new file mode 100644
index 0000000..470b51f
--- /dev/null
+++ b/debian/manpages/uronode.perms.5
@@ -0,0 +1,117 @@
+.TH URONODE.PERMS 5 "28 April 1998" Linux "Linux Programmer's Manual"
+.SH NAME
+uronode.perms \- URONode permissions file.
+.SH DESCRIPTION
+.LP
+.B URONode.perms
+file is read at program startup with the knowledge of users username
+(call), connection type (AX.25, NET/ROM, ROSE, TCP/IP), peers IP address
+(for TCP/IP) and port name (for AX.25). The first entry matching this
+information is taken and user is asked for password and given permissions
+according to it.
+.LP
+The lines within
+.B uronode.perms
+must either be a comment line, which starts with a # in the first column, or
+a permission entry in the following format, each field being delimited by
+white space:
+.sp
+.RS
+username type portname password permissions
+.RE
+.sp
+The field descriptions are:
+.sp
+.TP 14
+.B username
+This is matched against users username (call) without SSID. An asterisk
+(*) matches any username.
+.TP 14
+.B type
+This is matched against the type of the connection to user.
+Possible values for this field are:
+.RS 14
+.TP
+.B *
+matches any type of connection.
+.TP
+.B ax25
+matches users coming in with AX.25 and FlexNet.
+.TP
+.B netrom
+matches users coming in with NET/ROM.
+.TP
+.B rose
+matches users coming in with ROSE.
+.TP
+.B local
+matches TCP/IP connections where users host is in "local" network
+as defined in uronode.conf(5).
+.TP
+.B ampr
+matches TCP/IP connections where users host is in amprnet (44.0.0.0/8).
+.TP
+.B inet
+matches TCP/IP connections where users host is neither in "local"
+network nor in amprnet.
+.TP
+.B host
+matches users starting URONode from
+shell.
+.RE
+.TP 14
+.B portname
+If user is coming in with AX.25 this field is matched against the
+local port name the user is coming in via. An asterisk (*) matches
+any port name.
+.TP 14
+.B password
+If the previous three fields match and this field is not a single
+asterisk (*) the user is asked for a password. The password is
+then matched against this field.
+.TP 14
+.B permissions
+This field represents a a bitmask of operations the user is permitted
+to do. It is a sum of the values listed here:
+.RS 14
+.TP
+.B 1
+permits logging in even if no other permissions are given.
+.TP
+.B 2
+permits outgoing AX.25 and Flexnet connects.
+.TP
+.B 4
+permits outgoing NET/ROM connects.
+.TP
+.B 8
+permits telneting to hosts in the "local" network as defined in
+uronode.conf(5).
+.TP
+.B 16
+permits telneting to hosts in amprnet.
+.TP
+.B 32
+permits telneting to hosts neither in the "local" network nor in amprnet.
+.TP
+.B 64
+ANSI Color flag. Enable per interface to allow the user to have ANSI color
+graphics on their terminal. A "*" for the interface will flag color ON for
+all interfaces for that callsign. Suggested to leave OFF unless requested
+by the end user... but looks kewl in a shell terminal.
+.TP
+.B 128
+permits outgoing ROSE connects.
+.TP
+.B 256
+The no-escape flag. Disables the escape mechanism for this user.
+.TP
+.RE
+.SH FILES
+.LP
+/usr/local/etc/ax25/uronode.perms
+.SH "SEE ALSO"
+.BR uronode (8),
+.BR uronode.conf (5),
+.BR axports (5),
+.BR ax25 (4).
diff --git a/debian/patches/makefile b/debian/patches/makefile
index f75f591..30a86d4 100644
--- a/debian/patches/makefile
+++ b/debian/patches/makefile
@@ -1,5 +1,32 @@
+Description: Remove CFLAG and LDFlags for hardening, remove installman 
+to stop installation of gzipped manpages, added directory install for
+SBIN_DIR
+Author: Dave Hibberd <d@vehibberd.com>
+---
+This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
+
 --- a/Makefile.in
 +++ b/Makefile.in
+@@ -3,8 +3,8 @@
+ CC = gcc
+ LD = gcc
+ # CFLAGS = -O2 -g -s -Wstrict-prototypes
+-CFLAGS = -O2 -g -Wno-unused-result -Wstrict-prototypes
+-LDFLAGS =
++#CFLAGS = -O2 -g -Wno-unused-result -Wstrict-prototypes
++#LDFLAGS =
+ LIBS = -lax25 -lax25io
+ 
+ include Makefile.include
+@@ -24,7 +24,7 @@
+ .c.o:
+ 	$(CC) $(CFLAGS) -c $<
+ 
+-install: installbin installman installhelp installconf
++install: installbin installhelp installconf
+ 	install -m 755    -D -d	$(VAR_DIR)
+ 	install -m 755    -D -d	$(VAR_DIR)/node
+ 	install -m 644    -p etc/loggedin	$(VAR_DIR)/node
 @@ -33,6 +33,7 @@
  	install -m 644    -p etc/gateways	 $(VAR_DIR)/flex
  	
@@ -8,3 +35,21 @@
  	install -m 755 	-s -p	uronode		$(SBIN_DIR)
  	install -m 755  -s -p	nodeusers	$(SBIN_DIR)
  	install -m 755  -s -p	axdigi		$(SBIN_DIR)
+@@ -53,16 +54,7 @@
+ 	install -m 600    -p etc/uronode.routes   $(ETC_DIR)
+ 	install -m 600    -p etc/flexd.conf  $(ETC_DIR)
+ 
+-installman:
+-	install -m 755	  -D -d $(MAN_DIR)/man1 $(MAN_DIR)/man5 $(MAN_DIR)/man8
+-	install -m 644    -p man/nodeusers.1.gz  $(MAN_DIR)/man1
+-	install -m 644    -p man/uronode.conf.5.gz  $(MAN_DIR)/man5
+-	install -m 644    -p man/uronode.perms.5.gz $(MAN_DIR)/man5
+-	install -m 644    -p man/flexd.conf.5.gz $(MAN_DIR)/man5
+-	install -m 644    -p man/uronode.8.gz       $(MAN_DIR)/man8
+-	install -m 644	  -p man/axdigi.8.gz	 $(MAN_DIR)/man8
+-
+-upgrade: installman
++upgrade:
+ 	install -m 755 -p uronode       $(SBIN_DIR)
+ 	install -m 755 -p nodeusers     $(SBIN_DIR)
+ 	install -m 755 -p flexd		$(SBIN_DIR)
diff --git a/debian/uronode.manpages b/debian/uronode.manpages
new file mode 100644
index 0000000..2fb19fb
--- /dev/null
+++ b/debian/uronode.manpages
@@ -0,0 +1 @@
+debian/manpages/*