88 lines
2.4 KiB
Plaintext
88 lines
2.4 KiB
Plaintext
# /etc/ax25/uronode.conf - URONode example configuration file
|
|
#
|
|
# see uronode.conf(5)
|
|
|
|
# Idle timeout (seconds).
|
|
# This is how long we hold onto a dead link. 0 disables (this is NOT
|
|
# recommended! Time is in seconds.
|
|
|
|
IdleTimeout 900
|
|
|
|
# Timeout when gatewaying (seconds).
|
|
# This (in seconds) is a keep-alive for dead connects out of the node.
|
|
|
|
ConnTimeout 600
|
|
|
|
# Visible hostname. Will be shown at telnet login.
|
|
# set this to your ampr.org hostname.
|
|
|
|
HostName xx#xx.ampr.org
|
|
|
|
# SysOp email address
|
|
# Set this to your email address - preferred to use an ampr.org email.
|
|
|
|
Email <your@email.ampr.org>
|
|
|
|
# "Local" network.
|
|
# This is your local amprnet subnet in full. Do NOT use 44.0.0.0/8!
|
|
|
|
LocalNet 44.0.0.0/32
|
|
|
|
# Command aliases. See uronode.conf(5) for the meaning of the uppercase
|
|
# letters in the name of the alias. Examples below:
|
|
|
|
Alias CAllbook "telnet %{3:144.167.99.66} 2000 %1 s"
|
|
Alias CONVers "telnet %{2:44.88.0.9} 3600 \"/n %u %{1:1}\""
|
|
Alias DXCluster "telnet %{2:44.88.0.9} 9001 %1 s"
|
|
Alias WX "telnet %{3:38.102.137.140} %1 s"
|
|
|
|
# Hidden ports.
|
|
# List interfaces you wish not to display. Not suggested.
|
|
|
|
#HiddenPorts inet
|
|
|
|
# External commands. See uronode.conf(5) for the meaning of the uppercase
|
|
# letters in the name of the extcmd.
|
|
#
|
|
# Flags: 1 Run command through pipe
|
|
# 2 Reconnected flag
|
|
# 3 Run through pipe and reconnect
|
|
#
|
|
ExtCmd NEtstat 1 nobody /bin/netstat netstat --inet
|
|
|
|
# Node ID.
|
|
# This displays before all output texts when the user connects into
|
|
# your node via NetRom. Set to "" to leave blank.
|
|
# Note: This -must- be defined or will display as "(null)". A space
|
|
# is hardcoded in. Example: UROHUB:N1URO-2 do NOT add the bracket
|
|
# afterwards "}" this is predefined in URONode.
|
|
#
|
|
NodeId XXXXXX:XX#XX-#
|
|
|
|
# Ax25/Flex ID.
|
|
# This displays before some strings and at logout to the end user when
|
|
# they connect in via ax25 as defined in your ax25d.conf file. If
|
|
# you don't define this "(null)" will be presented to the end user. Its
|
|
# suggested you take this from your ax25d config which either faces a
|
|
# flexnet system OR your 2-meter user interface. Note: do NOT make this
|
|
# ssid the same as your NetRom SSID here or in ax25d.conf.
|
|
|
|
FlexId XX#XX-#
|
|
|
|
# ROSE ssid@network - if none, enter in: none.
|
|
|
|
RoseId XX#XX-#@####,######
|
|
|
|
# Netrom port name. This port is used for outgoing netrom connects.
|
|
|
|
NrPort nr0
|
|
|
|
# Syslog Logging level - suggest leaving this at 3 for debugging. 0
|
|
# halts logging.
|
|
|
|
LogLevel 3
|
|
|
|
# The default escape character (CTRL-T)
|
|
#
|
|
EscapeChar ^T
|