69 lines
1.7 KiB
Markdown
69 lines
1.7 KiB
Markdown
|
# Linux Native Stack
|
||
|
|
|
||
|
|
The linux native stack is highly configurable and can be easily installed on all Debian distros.
|
||
|
|
|
||
|
|
## Install
|
||
|
|
|
||
|
|
To get a basic node setup, the minimum viable software is:
|
||
|
|
|
||
|
|
`apt install libax25 ax25-tools ax25-apps uronode`
|
||
|
|
|
||
|
|
### BBS
|
||
|
|
|
||
|
|
To set up a BBS install fbb
|
||
|
|
|
||
|
|
`apt install fbb`
|
||
|
|
|
||
|
|
## Basic Config
|
||
|
|
|
||
|
|
We shall set up a single AX.25 port to receive calls and display Uronode to calling stations.
|
||
|
|
|
||
|
|
### ax25 ports
|
||
|
|
|
||
|
|
Set up your ax25 ports in `/etc/ax25/axports`
|
||
|
|
|
||
|
|
The following example is for a NinoTNC:
|
||
|
|
```
|
||
|
|
# /etc/ax25/axports
|
||
|
|
#
|
||
|
|
# The format of this file is:
|
||
|
|
#
|
||
|
|
# name callsign speed paclen window description
|
||
|
|
#
|
||
|
|
uhf UR0CAL-10 57600 255 2 UHF 9600bd
|
||
|
|
```
|
||
|
|
|
||
|
|
Modify the callsign to your own or your station's call.
|
||
|
|
|
||
|
|
This has to be attached as to the modem, in effect telling the computer to
|
||
|
|
listen to the modem's output. Run the below as root:
|
||
|
|
|
||
|
|
`kissattach /dev/ttyACM0 uhf`
|
||
|
|
|
||
|
|
### ax25d
|
||
|
|
|
||
|
|
ax25d (ax25 daemon) listens to incoming data and directs calling stations to the application you want them to use.
|
||
|
|
It can present different applications based on any combination of the callsign calling you, the callsign and SSID the calling station is calling and the port they are calling to.
|
||
|
|
|
||
|
|
ax25d is controlled by `/etc/ax25/ax25d.conf`
|
||
|
|
|
||
|
|
```
|
||
|
|
# /etc/ax25/ax25d.conf
|
||
|
|
#
|
||
|
|
# ax25d Configuration File.
|
||
|
|
#
|
||
|
|
# AX.25 Ports begin with a '['.
|
||
|
|
#
|
||
|
|
[UR0CAL-10 via uhf]
|
||
|
|
NOCALL * * * * * * L
|
||
|
|
default * * * * * * - root /usr/sbin/uronode uronode
|
||
|
|
```
|
||
|
|
|
||
|
|
Note the callsign, SSID and port are aligned with the axport in this example. Similar to axports, modify UR0CAL to our own callsign or your station's callsign.
|
||
|
|
|
||
|
|
ax25d is started by running the below as root:
|
||
|
|
|
||
|
|
`ax25d`
|
||
|
|
|
||
|
|
Stations should be able to call uronode on your system using AX.25.
|