112 lines
4.1 KiB
Markdown
112 lines
4.1 KiB
Markdown
# BPQ
|
|
|
|
I assume you have already [installed](../install/bpq.md) bpq from the repo.
|
|
|
|
## Configuration File
|
|
|
|
The configuration file I ship in the repo, there are hopefully some obvious fields to fill out. Once all the below holes are filled, you should be able to log in either with [QtTermTCP](../clients/qtttcp.md) or in your web browser at 127.0.0.1:8008, assuming you're on the same computer as the node.
|
|
|
|
| Field | Example | Purpose
|
|
| ----- | ------- | -------
|
|
| NODECALL | MM0RFN | The callsign your node shall identify as
|
|
| NODEALIAS | RFNNOD | The alias a calling NET/ROM station can use to connect directly to you
|
|
| LOCATOR | IO87dc | A 6 figure Maidenhead square where you are
|
|
| PASSWORD | test123 | A sysop password for configuration activities
|
|
| AUTOSAVE | 1 | Autosave the NET/ROM Nodes Table on shutdown
|
|
| NODESINTERVAL | 30 | Interval between NET/ROM NODES broadcasts in minutes
|
|
| MINQUAL | 50 | The minimum quality of NET/ROM node included in your NODES broadcasts.
|
|
| CTEXT | `Hi you look great! ***` | Text displayed when a user connects
|
|
|
|
### Ports
|
|
|
|
Port configs in BPQNode aren't too complicated. A common Gotcha is that you configure a port specific broadcast and end up double-broadcasting, both the node master broadcast and the port specific one.
|
|
|
|
#### KISS
|
|
|
|
A common port entry for a [NinoTNC](../modems/ninotnc.md) specifically (but also, more generally, a KISS Modem) looks like:
|
|
|
|
```
|
|
PORT
|
|
PORTNUM=1
|
|
ID=VHF
|
|
TYPE=ASYNC
|
|
PROTOCOL=KISS
|
|
KISSOPTIONS=ACKMODE
|
|
COMPORT=/dev/ttyACM0
|
|
SPEED=57600
|
|
FRACK=4000
|
|
PACLEN=150
|
|
DIGIFLAG=0
|
|
QUALITY=192
|
|
MINQUAL=20
|
|
ENDPORT
|
|
```
|
|
|
|
Key settings to observe are the `COMPORT`, which should be the serial port of the device, and `SPEED`. For a NinoTNC this is always 57600, but for QtSoundModem, Direwolf or older hardware may be 9600 or something else. Check your modem configuration!
|
|
|
|
`QUALITY` sets the assumed quality of connections coming in - I recommend higher quality (up to 200) for higher speed links. Setting this to 0 will disable NET/ROM on the port, and this is current recommended standard practise on HF within the UK Packet Radio Network.
|
|
|
|
#### Telnet
|
|
|
|
BPQ's Telnet Port sets the TCP Ports for Telnet, FBB and HTTP connetions, alongside the username and password. This will come in useful when using [QtTTCP](../clients/qtttcp.md) as a monitor and control application.
|
|
|
|
```
|
|
PORT
|
|
PORTNUM=9
|
|
ID=Telnet
|
|
DRIVER=Telnet
|
|
CONFIG
|
|
LOGGING=1
|
|
CMS=1
|
|
DisconnectOnClose=1
|
|
TCPPORT=8010
|
|
FBBPORT=8011
|
|
HTTPPORT=8008
|
|
LOGINPROMPT=user:
|
|
PASSWORDPROMPT=password:
|
|
MAXSESSIONS=10
|
|
CTEXT=Thanks for connecting\n Enter ? for list of commands\n\n
|
|
USER=username,xxxxxxxx,m0aaa,,SYSOP
|
|
ENDPORT
|
|
```
|
|
|
|
`USER` is the key configuration to change here - change `username` to your desired administrator username, `xxxxxxx` to the password and `m0aaa` to the callsign of the administrator.
|
|
|
|
## Mail Configuration
|
|
|
|
Mail configuration isn't easy to get your head round! I'm still not clear on it
|
|
all, and I think many others are in the same boat. It's done through the browser
|
|
instead of on the command line, which makes it slightly more approachable.
|
|
|
|
Navigate to [http://localhost:8008](http://localhost:8008), assuming your HTTPPORT is set to 8008 and you're on the same machine. This
|
|
will present you with the below view:
|
|
|
|
|
|
|
|
Select 'Mail Mgmt' and log in with the details you put in `USER`. The starting
|
|
point here is 'Configuration'.
|
|
|
|
### Configuration to Send & Receive
|
|
|
|
The configuration tab is your starting point. You need a 'Hierarchical'
|
|
address, this will tell other systems where you are and help the network send
|
|
things to you. It's similar to the domain of your email, like `@gmail.com`.
|
|
|
|
Set your BBS call - this will either be your personal callsign or an allocated
|
|
GB7xxx series callsign from the ETCC.
|
|
|
|
Hierarchical addresses in the UK take the following format:
|
|
|
|
`#xx.GBR.EURO`
|
|
|
|
Where xx is a number that defines your region. You can find your region with
|
|
[this map]().
|
|
|
|
I recommend unticking `Send System Msgs to SYSOP call` and ticking `Don't hold
|
|
Messages From New Users`.
|
|
|
|
### Forwarding to Neighbours
|
|
### Users
|
|
|
|
|